Classification of capacitors

On 2018-10-30 11:59:35  in Relays

Classification of capacitors

According to function.It can be divided into polyester capacitor,mica capacitor,high frequency ceramic capacitor,monolithic capacitor ...

​how to detect the four end small power thyristor?

On 2018-10-29 15:00:02  in Relays

​how to detect the four end small power thyristor?

To detect the unidirectional conductivity of PN junction,the multimeter is placed in RX 1K block,and the positive and negative resistance between A-GA,GKGA and Gk-K are measured. ...

Potentiometer detection and resistance detection

On 2018-08-22 12:04:06  in Relays

Potentiometer detection and resistance detection

The actual resistance value can be measured by connecting two forms (no positive or negative) to the two ends of the resistor respectively. ...

Four wave soldering daily maintenance and maintenance knowledge

On 2018-10-30 11:01:43  in Relays

Four wave soldering daily maintenance and maintenance knowledge

Four wave soldering daily maintenance and maintenance knowledge 1 regularly check the heating pipe voltage is normal,too high voltage will damage the heating pipe. ...

What is a monochrome LED dot matrix display?

On 2018-10-29 15:27:20  in Relays

What is a monochrome LED dot matrix display?

Excellent LED dot matrix display is a monochrome light-emitting diode in accordance with the structure of rows and columns ...

Integrated circuit socket

On 2018-08-24 10:46:22  in Relays

Integrated circuit socket

Connectors are used to connect cables or electronic devices that can be repeatedly connected and separated. ...

what is a solid state relay (SSR)?

On 2018-12-25 13:11:35  in Relays

what is a solid state relay (SSR)?

This article writes about the solid state relay (SSR) ...

Transistor FET

On 2018-08-24 11:08:36  in Relays

Transistor FET

The appearance of the public field effect transistor is shown in Fig.First, the classification of FET. ...

Identification and detection of capacitance components

On 2018-08-22 12:26:48  in Relays

Identification and detection of capacitance components

Inductors are usually classified by skeleton, winding, shielding, packing material, magnetic core or magnetic core. ...

Plug-in of electronic components

On 2018-11-01 13:51:17  in Relays

Plug-in of electronic components

Manual insertion and welding should be first inserted into those components that need to be mechanically fixed,such as the power device radiator,bracket,clip,etc,and then insert the need to weld fixed components. ...

Diode rectifier filter circuit Diode half wave rectifier circuit

On 2018-08-28 17:36:03  in Relays

Diode rectifier filter circuit Diode half wave rectifier circuit

Therefore, bridge rectifier has been widely used.Diode half wave rectifier circuit ...

​If there is no same type of pipe in use, how to replace it?

On 2018-10-26 15:50:14  in Relays

​If there is no same type of pipe in use, how to replace it?

Diodes are generally not good repair, damage can only be replaced. In selecting diodes, we should pay attention to the following principles. ...

Diode and transistor detection

On 2018-08-22 12:31:42  in Relays

Diode and transistor detection

In identifying and detecting common components, the resistance is the forward resistance of the diode. ...

What is a Schottky diode? How to detect?

On 2018-10-26 15:54:21  in Relays

What is a Schottky diode? How to detect?

Schottky diode is a low-power, high-current,ultra-high-speed semiconductor device, reverse recovery time trr can be small to a few nanoseconds ...

What are the trends in data storage in 2020?

On 2020-09-15 10:34:06  in Relays

What are the trends in data storage in 2020?

This article describes the characteristics of the data storage. ...

Types and detection methods of switching devices

On 2018-11-01 16:57:50  in Relays

Types and detection methods of switching devices

The switch is the component that completes the electrical connection and disconnection through a certain action,which is generally connected in series to realize the transmission and control of signal and electric energy ...

Identification and detection of active resistance elements

On 2018-08-22 11:08:45  in Relays

Identification and detection of active resistance elements

Resistance is one of the most common and basic electronic components. ...

The resistance between 2E and C

On 2018-10-27 11:00:40  in Relays

The resistance between 2E and C

The resistance between 2E and C.Silicon tube is almost infinite size power pin tube in the tens of thousands of euros,high-power wrong tube in the hundreds of Europe.If the measured resistance is zero ...

What is a relay?

On 2018-12-15 15:06:06  in Relays

What is a  relay?

This article briefly introduces the classification of relays ...

Variable capacitance diode, step recovery diode, bidirectional trigger diode

On 2018-08-24 10:57:12  in Relays

Variable capacitance diode, step recovery diode, bidirectional trigger diode

It is usually used to trigger bidirectional thyristors, or to form an overvoltage protection circuit. ...

Sequential logic circuit register

On 2018-08-28 17:30:45  in Relays

Sequential logic circuit register

it cannot be started. Indicates whether the number of valid cycles is an increment counter or a decrement counter, and the mode (count length) function of the state machine (counter), such as a decimal number. ...

Common field effect transistor Slice field effect transistor

On 2018-08-28 17:24:04  in Relays

Common field effect transistor Slice field effect transistor

Low power field effect transistor, low power field effect transistor, high input impedance, low driving current, with low noise characteristics ...

What is a reed pipe and dry reed relay and how to detect them?

On 2018-12-27 13:51:03  in Relays

What is a reed pipe and dry reed relay and how to detect them?

This article introduces reed pipe and dry reed relay ...

The types and characteristics of solder wave crests

On 2018-10-30 11:38:53  in Relays

The types and characteristics of solder wave crests

let the solder joints get reliable wetting;the stationary tin wave at the rear is perfect for further trimming the solder joints that have been wettable but irregular in shape ...

Basic SR latch trigger

On 2018-08-28 17:26:28  in Relays

Basic SR latch trigger

State transition diagram is a common tool in sequential logic circuits. It writes states in circles, arrows indicate the direction of state transition, and transition conditions are written next to arrows. ...

How to identify and detect relays?

On 2018-12-20 14:13:55  in Relays

How to identify and detect relays?

This article describes how to identify and detect relays ...