Classification of capacitors
On 2018-10-30 11:59:35 in Relays
According to function.It can be divided into polyester capacitor,mica capacitor,high frequency ceramic capacitor,monolithic capacitor ...
Potentiometer detection and resistance detection
On 2018-08-22 12:04:06 in Relays
The actual resistance value can be measured by connecting two forms (no positive or negative) to the two ends of the resistor respectively. ...
The resistance between 2E and C
On 2018-10-27 11:00:40 in Relays
The resistance between 2E and C.Silicon tube is almost infinite size power pin tube in the tens of thousands of euros,high-power wrong tube in the hundreds of Europe.If the measured resistance is zero ...
Main parameters of inductors
On 2018-08-22 12:34:29 in Relays
The main parameters of inductors include inductance, permissible deviation, quality factor, sectional capacitance and rated current. ...
What is a reed pipe and dry reed relay and how to detect them?
On 2018-12-27 13:51:03 in Relays
This article introduces reed pipe and dry reed relay ...
How to identify and detect relays?
On 2018-12-20 14:13:55 in Relays
This article describes how to identify and detect relays ...
Identification and detection of active resistance elements
On 2018-08-22 11:08:45 in Relays
Resistance is one of the most common and basic electronic components. ...
Common field effect transistor Slice field effect transistor
On 2018-08-28 17:24:04 in Relays
Low power field effect transistor, low power field effect transistor, high input impedance, low driving current, with low noise characteristics ...
Basic SR latch trigger
On 2018-08-28 17:26:28 in Relays
State transition diagram is a common tool in sequential logic circuits. It writes states in circles, arrows indicate the direction of state transition, and transition conditions are written next to arrows. ...
What is the structure and main parameters of the electromagnetic relay?
On 2018-12-18 15:17:36 in Relays
This article describes the structure and main parameters of the electromagnetic relay ...
Identification and detection of capacitance components
On 2018-08-22 12:26:48 in Relays
Inductors are usually classified by skeleton, winding, shielding, packing material, magnetic core or magnetic core. ...
Plug-in of electronic components
On 2018-11-01 13:51:17 in Relays
Manual insertion and welding should be first inserted into those components that need to be mechanically fixed,such as the power device radiator,bracket,clip,etc,and then insert the need to weld fixed components. ...
The types and characteristics of solder wave crests
On 2018-10-30 11:38:53 in Relays
let the solder joints get reliable wetting;the stationary tin wave at the rear is perfect for further trimming the solder joints that have been wettable but irregular in shape ...
What is a Schottky diode? How to detect?
On 2018-10-26 15:54:21 in Relays
Schottky diode is a low-power, high-current,ultra-high-speed semiconductor device, reverse recovery time trr can be small to a few nanoseconds ...
Transistor FET
On 2018-08-24 11:08:36 in Relays
The appearance of the public field effect transistor is shown in Fig.First, the classification of FET. ...
How to Reduce the Power Consumption of the Relay
On 2018-12-28 11:03:22 in Relays
This article describes the methods to reduce the power consumption of the relay ...
What is a damped line output transistor?
On 2018-10-27 11:06:35 in Relays
The line output high power transistor with a damping transistor is a special tube in the output circuit of the television.Figure 6A shows the internal structure and equivalent circuit of the output transistor with damping line ...
What is a transistor? What's the role?
On 2018-10-27 10:46:55 in Relays
Transistors are also called semiconductor diodes,which can be said to be the most important devices in electronic circuits ...
Diode rectifier filter circuit Diode half wave rectifier circuit
On 2018-08-28 17:36:03 in Relays
Therefore, bridge rectifier has been widely used.Diode half wave rectifier circuit ...