TAJD106K025RNJ Capacitors

Series:	TAJ
Packaging:	Tape & Reel (TR)
Lead Free Status / RoHS Status:	--
Part Status:	Active
Moisture Sensitivity Level (MSL):	--
Capacitance:	10µF
Tolerance:	±10%
Voltage - Rated:	25V
Type:	Molded
ESR (Equivalent Series Resistance):	1.2 Ohm
Operating Temperature:	-55°C ~ 125°C
Lifetime @ Temp.:	--
Mounting Type:	Surface Mount
Package / Case:	2917 (7343 Metric)
Size / Dimension:	0.287" L x 0.169" W (7.30mm x 4.30mm)
Height - Seated (Max):	0.122" (3.10mm)
Lead Spacing:	--
Manufacturer Size Code:	D
Features:	General Purpose
Failure Rate:	--

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Introduction

Tantalum capacitors, also known as tantalum electrolytic capacitors, are one of the most widely used types of capacitors in electronics. They are small and lightweight, but can hold a large amount of charge due to their high capacitance. One of the most popular tantalum capacitors is the TAJD106K025RNJ, which is a high-capacity, high-temperature, low-impedance device that is typically used in audio, video, and power applications. In this article, we will discuss the application field and working principle of the TAJD106K025RNJ tantalum capacitor.

The TAJD106K025RNJ Application Field

The TAJD106K025RNJ is a type of electrolytic capacitor, which means it uses a thin layer of electrical insulating electrolyte in order to store charges and provide electrical insulation. It also has two metal plates, one positive and one negative, that allow it to hold a voltage difference and provide capacitance. The TAJD106K025RNJ is a high-capacitance and low-impedance device, which makes it ideal for applications that require large amounts of energy over relatively short periods of time. These applications include power supplies, audio and video electronics, and automotive ignition systems.The TAJD106K025RNJ also has a high temperature rating, so it is able to function in temperatures up to 105°C. This makes it perfect for electronics applications in areas where temperatures can get extremely high, such as cars, planes, and industrial machinery. It also has a long life and is able to withstand higher voltages than some of its competitors, making it well-suited for high-current, high-voltage applications.

The Working Principle of the TAJD106K025RNJ

The TAJD106K025RNJ is an electrolytic capacitor, and its working principle is based on the two metal plates, one positive and one negative, that form its electrodes. In between the two plates is a thin layer of electrical insulating electrolyte, which provides insulation between the two electrodes. When a voltage is applied to the two plates, it causes a current to flow in the electrolyte, which produces a separation of the positive and negative charges. This charge separation produces an electric field between the electrodes, resulting in an electrical field that can store a large amount of energy.When the TAJD106K025RNJ is connected to a power source, its two electrodes act as a source of electrons. The more voltage that is applied, the more electrons flow from one plate to the other, thus increasing the amount of energy stored in the device. When the current is disconnected, the stored energy is released, resulting in a rapid discharge of energy.

Conclusion

The TAJD106K025RNJ is a highly versatile tantalum capacitor that is suitable for a wide variety of applications. Its high-capacity, high-temperature, and low-impedance capabilities make it ideal for audio, video, and power applications. In addition, it has a long life and can withstand higher voltages than some of its competitors. The working principle of the TAJD106K025RNJ is based on the two metal plates and the thin layer of insulating electrolyte that provide capacitance and allow it to store a large amount of energy.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description