MP915-40.0-1%

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Through Hole Resistors are among the most commonly used electrical components. As the name suggests, these resistors are installed in the holes of circuitry boards. MP915-40.0-1% is one type of through hole resistor. It is specially designed to dissipate the heat generated in the circuit, thus preventing the circuit from overheating and becoming unstable.

The MP915-40.0-1% through hole resistor is a high-power resistor composed of two or four independent resistive elements, each with a resistance value of 40 ohms +/-1%. It has a power rating of up to 915 watts and an operating temperature range of -40°C to 160°C. The resistance value of the resistor can be adjusted by changing the internal construction of the device.

The MP915-40.0-1% through hole resistor is typically used to control the flow of power in high-power circuits. Its resistance can vary depending on the current flowing through it. This in turn allows for greater control and stability in the circuit. In addition, due to its ability to dissipate heat, this resistor can be used in power supply circuits that are constantly switching between high and low loads.

Due to its high power rating and compact size, the MP915-40.0-1% through hole resistor is also popularly used in automotive applications. It can be used to control the voltage in starter circuits as well as in alternator circuits. It can also be used to regulate the flow of current in the braking system.

The working principle of the MP915-40.0-1% through hole resistor is based on the Ohm\'s law. According to this principle, the current flowing through the resistor is proportional to the voltage across it. Thus, by adjusting the resistance of the resistor, the amount of current flowing through the circuit can be controlled.

To sum up, the MP915-40.0-1% through hole resistor is a high-power resistor with an adjustable resistance that is used to control the flow of current in high-power circuits. It can be used in a number of applications, including automotive and power supply circuits. It works on the principle of Ohm\'s law, which states that current is proportional to voltage across the resistor.

The specific data is subject to PDF, and the above content is for reference