Allicdata Part #: | 391-8556-004-ND |
Manufacturer Part#: |
391-8556-004 |
Price: | $ 0.00 |
Product Category: | Uncategorized |
Manufacturer: | ITT Cannon, LLC |
Short Description: | FSK-SIG-6POL-SOCK-TYPE1-BLAU |
More Detail: | N/A |
DataSheet: | 391-8556-004 Datasheet/PDF |
Quantity: | 1000 |
1 +: | 0.00000 |
Series: | * |
Part Status: | Active |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
The discipline of engineering has come far over the years and with it the tools that are available for use by industry professionals. One such tool is the 391-8556-004 and, while it may not have the notoriety of the microscope or the power of the computer, it has its place in the engineering world. Its application field and working principle, while quite complex for casual observers, are quite interesting, and understanding them can provide an appreciation for the kind of work an engineer might do.
The 391-8556-004 is an electrical device that is used for voltage measurement and is often referred to as a transducer. The transducer is able to capture electrical signals and then converts them into an analog or digital representation of the voltage. The analog signal is then used in various circuits to determine the exact voltage of the signal, while the digital representation is used in a variety of applications including process control and power relaying.
The 391-8556-004 works by utilizing the concept of impedance. Impedance is the amount of resistance that a system or device has to an applied voltage or current. In the case of the transducer, this is measured in ohms, and the voltage is measured in volts. The ohm is the unit of resistance, and the voltage is the measure of electric potential. This electric potential is measured by the transducer and is then converted into an analog or digital representation, depending on what the application is.
In addition to measuring voltage, the 391-8556-004 is also capable of measuring current and power as well. It does this by using a process called Hall Effect. The hall effect occurs when a voltage is applied to a measuring device, such as the transducer, and is then measured by the surrounding material. This material then produces a magnetic field that is proportional to the applied voltage. As the magnetic field changes, a measurement is taken and converted back into an analog or digital representation, giving the engineer an accurate measure of the current produced.
The 391-8556-004 is also capable of providing protection from external sources of interference. To do this, it is equipped with an isolation system. This system is designed to block any external signals and protect the transducer from any unwanted noise or currents. This is especially useful in industrial settings, where any external interference can cause major problems.
The 391-8556-004 is an important tool in the engineering world. It allows engineers to accurately measure voltage, current, and power in a safe and reliable manner. It is also capable of providing protection from external sources, which can be an invaluable asset in certain scenarios. Finally, understanding the application field and working principle of the 391-8556-004 can provide insight into the kind of work an engineer must do, and inspire admiration for the complex and impressive engineering feats that are being performed every day.
The specific data is subject to PDF, and the above content is for reference
DIODE GENERAL PURPOSE TO220
CB 6C 6#16 SKT RECP
CA08COME36-3PB-44
CA-BAYONET
CB 6C 6#16S SKT PLUG
CAC 3C 3#16S SKT RECP LINE