RLR05C1501FSB14

Series:	Military, MIL-PRF-39017/05, RLR05
Packaging:	Bulk
Part Status:	Active
Resistance:	1.5 kOhms
Tolerance:	±1%
Power (Watts):	0.125W, 1/8W
Composition:	Metal Film
Features:	Military, Moisture Resistant, Weldable
Temperature Coefficient:	±100ppm/°C
Operating Temperature:	-65°C ~ 150°C
Package / Case:	Axial
Supplier Device Package:	Axial
Size / Dimension:	0.066" Dia x 0.150" L (1.68mm x 3.81mm)
Height - Seated (Max):	--
Number of Terminations:	2
Failure Rate:	S (0.001%)

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Through Hole Resistors

Through hole resistors, also known as wirewound resistors, are resistors with two metal wires wound around a post or core. The core is often made of an insulating material such as porcelain, ceramic, or phenolic. The resistance is determined by the size of the wire and the number of turns, and the inductance is determined by their physical size and construction. In general, through hole resistors have higher power ratings and lower inductance than surface mount resistors, making them well suited for high power applications.The RLR05C1501FSB14 is a through hole resistor specifically designed for use in automotive applications. It is a low inductance, high power chip resistor that can handle up to 2.5A at temperatures up to -30°C to +125°C. The package size of this component is designed to fit in tight places such as on circuit boards populated with very small components, making it ideal for increasingly crowded automotive boards.The RLR05C1501FSB14 operates on the principle of an ohmic element. An ohmic element is a device that has a constant, linear current-voltage relationship over a wide range of operating conditions. This is accomplished by using the “Ohm’s Law” equation, which states that the current flowing through a conductor is directly proportional to the voltage applied across it. This means that the resistance of the chip resistor is determined by the size of the wire it is wrapped around, and the number of turns. The working principle behind the RLR05C1501FSB14 is a simple one. The current flowing through the resistor is proportional to the voltage applied to it and is determined by the resistance value of the resistor. In other words, as the voltage increases, the current will increase in proportion to the applied voltage. This makes it ideal for applications where precise control of current is needed, such as in automotive applications. The RLR05C1501FSB14 is designed to be used in a variety of automotive applications such as power supplies, engine control modules, motor controllers, and LED lighting systems, among others. Its high power rating makes it well suited for use in high power circuits, where precise control of current is needed. Its small package size also makes it ideally suited for use in densely populated PCBs, as there is often limited space available in automotive applications.The RLR05C1501FSB14 is a reliable, high performance chip resistor, perfect for automotive applications that require precise control of current. Its low inductance and high power rating make it the perfect choice for applications that require accurate control of current within tight confines. It is designed to withstand temperatures up to -30°C to +125°C, making it ideal for automotive applications. In summary, the RLR05C1501FSB14 is a through hole resistor specifically designed for use in automotive applications that require precise control of current within tight confines. Its high power rating and low inductance make it the ideal choice for power supply and LED lighting applications. It is directly proportional to the voltage applied across it and will increase in current as the voltage increases. The RLR05C1501FSB14 is an easy to use component that is designed to withstand temperatures up to -30°C to +125°C, allowing it to be used in a variety of automotive applications.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description