RLR07C78R7FMB14

Series:	Military, MIL-PRF-39017/01, RLR07
Packaging:	Bulk
Part Status:	Active
Resistance:	78.7 Ohms
Tolerance:	±1%
Power (Watts):	0.25W, 1/4W
Composition:	Metal Film
Features:	Military, Moisture Resistant, Weldable
Temperature Coefficient:	±100ppm/°C
Operating Temperature:	-65°C ~ 150°C
Package / Case:	Axial
Supplier Device Package:	Axial
Size / Dimension:	0.090" Dia x 0.250" L (2.29mm x 6.35mm)
Height - Seated (Max):	--
Number of Terminations:	2
Failure Rate:	M (1%)

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Introduction to Through Hole ResistorsThrough-hole resistors are commonly used in circuits for various applications because they provide a reliable source of electrical resistance that can be adjusted to vary the amount of current flowing through a circuit. The basic structure of a through-hole resistor consists of a small cylindrical ceramic body and two wires – one wire on each end, each connected to a metal contact. By varying the length of the wire, the amount of resistance is adjusted.RLR07C78R7FMB14 Through Hole ResistorThe RLR07C78R7FMB14 is a through-hole resistor designed to provide consistent and reliable electrical resistance in a wide range of applications. It has a rated power of 7W, a maximum voltage rating of 200VAC and a maximum operating temperature of + 125°C. The resistor can be used in high power, low voltage applications such as LED lighting, audio amplifiers, and power supplies.Application Fields and Working PrincipleThe RLR07C78R7FMB14 through-hole resistor is designed for a wide variety of applications and is suitable for use in circuits ranging from audio amplifiers to LED lighting. It can be used in high power, low voltage applications to increase the amount of current flowing through the circuit, or to limit the amount of current flowing through the circuit. The working principle of the RLR07C78R7FMB14 is based on the resistance created by the two wires, which vary in length depending on the amount of current flowing through the circuit. The amount of resistance created by the two wires dictates the amount of current flowing through the circuit.Conclusion The RLR07C78R7FMB14 through-hole resistor is a reliable and consistent electrical resistance component that can be used in a wide range of applications. Its rated power, maximum voltage rating, and maximum operating temperature make it suitable for use in high power, low voltage applications such as LED lighting, audio amplifiers, and power supplies. The working principle of the resistor is based on the resistance created by the two wires, which vary in length depending on the amount of current flowing through the circuit. By adjusting the length of the wires, the amount of current flowing through the circuit can be regulated.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description