ADS901E/1K

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Analog to Digital Converters (ADC) are an important part of the data acquisition process. The ADS901E/1K is a low power 8-bit Analog to Digital Converter (ADC) with sampling rate of 1 kS/s. Its application field and working principle are as follows:

Application Field

The ADS901E/1K is designed to convert analog signals into digital signals in industrial and automation products. The high sampling rate and low power consumption of this ADC make it suitable for many applications. It can be used in a wide range of applications such as motor control, power supply monitoring, and industrial process control. It can also be used for medical equipment, home automation, and environmental monitoring. This ADC can be used in many scenarios where a low power and high resolution digital signal is required.

Working Principle

The working principle of ADS901E/1K is based on the successive approximation register (SAR) architecture. In a SAR architecture, the analog signal is sampled into an internal sample and hold (S&H) buffer at the beginning of each conversion. This internal sample and hold buffer is then updated on every clock cycle. The successive approximation register (SAR) compares the sample and hold value with a reference voltage. Depending on the comparison result, the internal SAR will either move up or down the voltage range until the correct voltage is reached. This is repeated on every clock cycle until the voltage reference is reached and the corresponding digital output is generated.

The ADS901E/1K has a low power shutdown mode, which reduces the power consumption when the ADC is not used. This is an important feature for battery powered applications. In addition, the ADC supports sleep mode, which allows the user to set the sampling rate according to the application. This helps to reduce power consumption while ensuring accurate data acquisition.

The ADS901E/1K ADC is also equipped with a built-in temperature sensor. This allows for temperature compensation and for increasing accuracy. The ADC is also capable of detecting and correcting for power supply noise, and is equipped with a gain control feature.

Conclusion

The ADS901E/1K is a low power 8-bit Analog to Digital Converter (ADC) with sampling rate of 1 kS/s. It can be used for a wide range of applications such as motor control, power supply monitoring, and industrial process control. The low-power shutdown mode and sleep mode of the ADC helps to reduce power consumption while ensuring accurate data acquisition. The ADC also features a built-in temperature sensor and noise compensation, making it a very capable ADC for a wide range of applications.

The specific data is subject to PDF, and the above content is for reference