RLR07C3303GRR36

Through Hole Resistors

Through hole resistors, also known as leaded resistors, are components that provide resistance to a circuit. It works by reflecting an electrical current to an appropriate level, and is usually in the form of a cylindrical wire, although other shapes may be incorporated. Unlike surface-mount resistors, they need to be soldered and heat-sunk into a circuit board. One example of a through-hole resistor is the RLR07C3303GRR36.

RLR07C3303GRR36 application field and working principle

The RLR07C3303GRR36 is a high-power, dual-element resistor that is commonly used for high-voltage applications. It is most commonly used for power conversion, overvoltage protection, and dynamic power control. It is also used in switch mode power supplies, as well as in DC/DC converters.

The RLR07C3303GRR36 has a resistor value range from 1 ohm to 8.2 ohms. This is a high-power, low inductance, wide temperature range resistor, which makes it an ideal choice for high-power, high-speed applications. The RLR07C3303GRR36 is able to maintain its resistor properties even under large temperature variations.

In terms of working principle, the RLR07C3303GRR36 is a resistor that works on the principle of a resistor-inductor-capacitor (R-L-C) system. This means the resistor is made up of a resistor, an inductor and a capacitor. The resistor is primarily used to convert electrical energy into thermal energy or to reduce the current flow in a circuit. The inductor is used to reduce the inductive reactance of the circuit and the capacitor is used to reduce the capacitive reactance of the circuit.

The RLR07C3303GRR36 has a high-resistance tolerance of ±5%, which means it can resist a certain amount of unavoidable deviations in the voltage and current that flows through it. It also has a current rating of 6.5A. It is constructed with an epoxy molding compound that gives it thermal stability, and excellent environmental protection.

Conclusion

The RLR07C3303GRR36 is a high-power, high-speed resistor that is commonly used in high-voltage, dynamic power control, and switch mode power supply applications. It is an ideal choice for improving the performance of circuits due to its high-resistance tolerance, current rating, and environmental protection properties. Its flexible, three-component structure makes it suitable for a variety of applications.