RP30-4815SFW/N-HC

Series:	POWERLINE RP30-FW
Packaging:	Tube
Part Status:	Active
Type:	Isolated Module
Number of Outputs:	1
Voltage - Input (Min):	18V
Voltage - Input (Max):	75V
Voltage - Output 1:	15V
Voltage - Output 2:	--
Voltage - Output 3:	--
Current - Output (Max):	2A
Power (Watts):	30W
Voltage - Isolation:	1.6kV
Applications:	ITE (Commercial)
Features:	Remote On/Off, OCP, OVP, SCP
Operating Temperature:	-40°C ~ 85°C
Efficiency:	91%
Mounting Type:	Through Hole
Package / Case:	6-DIP Module
Size / Dimension:	2.00" L x 1.00" W x 0.40" H (50.8mm x 25.4mm x 10.2mm)
Control Features:	Enable, Active Low

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

<p>DC-DC converters are electrical circuits that convert a DC voltage from one level to another. The most common and widely-used type of DC-DC converter is the RP30-4815SFW/N-HC converter. It is an advanced power switching regulator that offers high performance, high efficiency, robust design and low noise performance for use in a variety of applications. In this article, we will explore the application field and working principle of the RP30-4815SFW/N-HC converter.</p><p>The application field of the RP30-4815SFW/N-HC converter spans a wide range, from industrial to consumer electronics. It is often used in applications where a low-noise DC voltage is needed such as communications, automotive, medical equipment and microprocessor applications. It is also suitable for use in high-speed optical networking and fibre-to-the-home systems, as well as in optical transceivers. In addition, it can be used to power general DC-DC applications such as DC/DC converters, battery chargers and motor drives.</p><p>The working principle of the RP30-4815SFW/N-HC converter is based on the principle of pulse width modulation (PWM). A PWM signal is generated by the microcontroller, which is used to drive the MOSFET that switches the inductor on and off. This causes the current to flow into the output capacitor, generating a steady voltage on the output side.</p><p>The design of the RP30-4815SFW/N-HC converter is highly efficient and provides low noise operation without the need of an external shield or copper pickup loop. The converter is able to operate at a wide range of frequencies, from 100 kHz to 1 MHz, and offers a wide operating temperature range of -40°C to +85°C. It also features an integrated soft-start circuit and an integrated under-voltage lockout feature to prevent operation at an unsafe input voltage range.</p><p>The RP30-4815SFW/N-HC converter is an advanced power converter with a wide range of applications in various system designs. Its high efficiency, robust design and low noise performance make it an ideal choice for a variety of applications, from industrial to consumer electronics. In addition to being able to operate at a wide range of frequencies, the RP30-4815SFW/N-HC converter also offers an integrated soft-start circuit and an integrated under-voltage lockout feature to prevent operation at an unsafe input voltage range.</p>

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description