RP30-4815SF

Current - Output (Max):	2A
Control Features:	Enable, Active High
Size / Dimension:	2.00" L x 1.00" W x 0.40" H (50.8mm x 25.4mm x 10.2mm)
Package / Case:	6-DIP Module
Mounting Type:	Through Hole
Efficiency:	91%
Operating Temperature:	-40°C ~ 85°C
Features:	Remote On/Off, OCP, OTP, OVP, SCP
Applications:	ITE (Commercial)
Voltage - Isolation:	1.6kV
Power (Watts):	30W
Series:	POWERLINE RP30-F
Voltage - Output 3:	--
Voltage - Output 2:	--
Voltage - Output 1:	15V
Voltage - Input (Max):	75V
Voltage - Input (Min):	36V
Number of Outputs:	1
Type:	Isolated Module
Part Status:	Active
Packaging:	Tube

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

DC DC Converters

DC to DC converters are becoming more and more common, and the RP30-4815SF is one of the most popular among them. This converter is specifically designed for use in high current applications, which requires more than 10 amperes of current and up to 200 volts of input voltage. It is commonly used in industrial, military, and automotive applications, as well as in audio systems, communications systems, and scientific instrumentation. It is also popular for its high efficiency and low cost.The RP30-4815SF works in a simple yet effective way. First, the DC input voltage is reduced to a manageable level using a buck converter. This is done by switching on and off the positive and negative stages of the buck converter so that the voltage output to the load is always reduced. The output of this controller is regulated, providing a constant voltage to the load.Next, the DC output is converted into AC with the help of an inductor and a diode. The inductor absorbs energy from the DC source and releases it in the form of current to the load, which is regulated by the diode. The voltage is further regulated by using a transformer to lower the voltage.This method of transforming DC to AC is known as pulse width modulation (PWM). It works by controlling the on and off times of the switches corresponding to the positive and negative stages of the converter. This ensures that the output voltage is constant.Lastly, the AC output is regulated using a pulse transformer and a rectifier. The transformer accelerates the AC signal, and the rectifier converts it back into DC form. The DC output voltage is then equal to the input voltage, minus a small amount of power that was used by the circuit to maintain the balance between the positive and negative stages. This process provides a very efficient way of transferring energy from one stage to another.The RP30-4815SF is a very efficient converter, with an efficiency of up to 83%. This means that it is able to transfer a lot of energy at a very low cost. Its usage in audio and communication systems, as well as in scientific instrumentation, makes it one of the most popular DC to DC converters on the market today.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description