ACPL-5160

Series:	--
Packaging:	Tube
Part Status:	Active
Technology:	Optical Coupling
Number of Channels:	1
Voltage - Isolation:	1500VDC
Common Mode Transient Immunity (Min):	9kV/µs
Propagation Delay tpLH / tpHL (Max):	500ns, 500ns
Pulse Width Distortion (Max):	300ns
Rise / Fall Time (Typ):	100ns, 100ns
Current - Output High, Low:	2A, 2A
Current - Peak Output:	2.5A
Voltage - Forward (Vf) (Typ):	--
Voltage - Supply:	15 V ~ 30 V
Operating Temperature:	-55°C ~ 125°C
Mounting Type:	Through Hole
Package / Case:	16-DIP (0.311", 7.90mm)
Supplier Device Package:	16-DIP
Approvals:	--

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Overview

The ACPL-5160 is an isolator suitable for a wide range of applications. It is a low-voltage, low-power, solid-state device capable of isolating and isolating signals from one side of a circuit to the other. It has two outputs, one for input and one for output, which can be independently controlled by two different types of drivers. This isolator is commonly used in applications involving power switching, high-voltage switching, and circuit protection.

Application Field

The ACPL-5160 is widely used as an isolator for applications where an electrical signal needs to be isolated from the main system or circuit. Its low-voltage operation and low-power requirements make it suitable for use in a range of lighting, industrial, automotive, consumer, and medical applications. For example, in lighting applications, it can be used to isolate signals from an external controller to an LED driver board, ensuring isolation of the electrical signals in lighting systems. Additionally, in industrial control systems, it can be used to isolate input and output signals from the main system. In automotive applications, the isolator can be used to isolate the control signals between a vehicle\'s navigation or audio systems, enabling the use of multiple systems with different operating voltages. In consumer and medical applications, the ACPL-5160 can be used to isolate and protect sensitive circuits in products such as medical monitoring equipment, patient monitors, or consumer electronics. By isolating the electrical signals between two areas of the system, it can protect against interference and unwanted system interactions.

Working Principle

The ACPL-5160 is an isolator which uses Field Effect Transistors (FETs) to isolate and enable signals from one side of the circuit to another. The inputs and outputs of the isolator can be driven by separate output drivers, depending on the application requirements. The output drivers connect the FETs used in the ACPL-5160 to the main supply, enabling the outputs to be switched on and off independently. When the FETs are turned on, the output driver sends a signal to the output, causing the signal to be isolated and enabled. The ACPL-5160 also provides additional protection from overvoltage and short-circuit to ensure system stability and safety. It is capable of working with inputs from both voltage and logic control sources.

Conclusion

The ACPL-5160 is a versatile isolator, designed to provide isolation of signals from one side of a circuit to another. It is suitable for a variety of applications, including lighting, industrial, automotive, consumer, and medical applications. The isolator is driven by two separate output drivers, allowing for independent control of each output. Additionally, by utilizing FETs, the ACPL-5160 also provides additional protection from overvoltage and short-circuit, ensuring system stability and safety.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description