HCPL-0631#500

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Optoisolators, also known as optocouplers, are electronic devices which transmit signals across an electrical isolation barrier. They are used to prevent electrical signals from being affected by the noise in the environment. The HCPL-0631#500 optoisolator is a logic output device which is capable of isolating two electrical systems. It can be used to drive LEDs or other light sources, as well as providing logic isolation.

The HCPL-0631#500 is a single-channel logic-output optoisolator with dual-in-line (DIL) package. It has an industry-standard 8-pin dual-in-line package (DIP) form, making it both easy to install and use. It is designed with internal protection circuitry against short-circuit and transient voltage surges. The optoisolator has a voltage range of 5 VDC to 24 VDC, and a logic-output voltage of 4.5 VDC to 24 VDC.

The HCPL-0631#500 is typically used in system-level isolation applications, such as controlling the LED light level, and providing logic isolation between nodes and circuits. It is also used in automotive lighting, industrial control systems, and electric vehicle and powertrain systems. The optoisolator provides electrical isolation between the control circui and the controlled circuit. The circuit side is connected to the power supply and the load, while the logic side is connected to the microcontroller or other logic circuit.

The optoisolator operates by using an LED driven by a current source to provide the output logic signal. The LED is connected in parallel with a photo-detector, which is biased by a current reference. The LED emits light when the logic input voltage is applied, and the light is detected by the photo-detector. This causes the detector to generate a voltage which is sent to the logic circuit as the output signal.

The HCPL-0631#500 features a wide range of input voltage, output voltage, and switching speeds. It has an on-state output delay time of 800μs and an off-state output delay time of 600μs. The response times to changes in the logic input voltage are consistent and accurate, even when switching between high and low logic levels. It has a logic output voltage rating of 14V, and a maximum logic-output current of 18mA.

The HCPL-0631#500 has a built-in isolation barrier between the input and output, which reduces the risk of failure due to external noise sources. The device has a high leak current rating, so it can be used in high-impedance circuits. It also has a high illumination level and low propagation delay, and it is RoHS-compliant and Lead (Pb)-free. This makes it an ideal choice for use in various applications that require high performance and reliability.

In summary, the HCPL-0631#500 optoisolator is a logic output optoisolator that uses an LED driven by a current source to provide the output logic signal. It has an industry standard 8-pin dual-in-line form, a wide range of input and output voltages, and features a high illumination level, low propagation delay, and built-in isolation. The optoisolator is typically used in system-level isolation applications such as controlling LED light levels, and providing logic isolation between nodes and circuits. The device is suitable for use in various high performance and reliable applications.

The specific data is subject to PDF, and the above content is for reference