HCPL-901J

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Digital isolators are used to limit exposure to high voltages and frequencies in order to ensure safety and reliability. These devices are a common form of electrical isolation and often use opto-isolators or transformers. One such device is the HCPL-901J, which is an opto-coupled digital isolator. This device is built using CMOS opto-isolator which provides both high speed and quality data transfer as well as reliable electrical isolation.

The HCPL-901J is covered by an 8-Pin dual-in-line (DIP) package and is rated for up to 10 MHz and 15 kV/µs of common mode transient voltage. It is suitable for applications including industrial and telecommunication, medical, and automotive control systems. Its wide range of operating temperature allows it to be used in a variety of environments.

The HCPL-901J works by using an integrated opto-coupler, which couples light from a light source (LED) to a photodetector. Light from the LED is sent across an insulation barrier and is then detected by the photodetector on the other side. The electrical isolation between the two sides is provided by a dielectric barrier composed of an epoxy resin between the LEDs and the photodetector. This barrier has a high breakdown voltage rating and is able to withstand electrical spikes or surges.

The HCPL-901J is able to transfer bipolar data, meaning positive and negative voltage levels, which is valuable for a wide range of applications. The data transmitted by this device is digital which eliminates the need for data conversion or alignment. The HCPL-901J is still able to pass analog signals, such as sine waves, through a linearizing circuit, which allows it to operate in both digital and analog applications.

The HCPL-901J also features several control lines including line select (LS), line enable (LE), and input/output control. These control lines provide increased flexibility and can be used to fine tune the device’s operation for different applications. Additionally, the HCPL-901J also features an EN signal input, which allows the user to enable or disable the device at will.

The HCPL-901J is designed to provide maximum isolation and protection for data signals connected to sensitive circuits. It is a reliable, cost-effective, and flexible digital isolator suitable for a wide range of industrial, medical, and automotive applications.

The specific data is subject to PDF, and the above content is for reference