AV6322643 Switches

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

As a switch used to detect physical motion or position, the AV6322643 is classified as a Snap Action, Limit Switch. It is a miniature, single-pole, double-throw switch that is physically operated externally by the user and can detect any desired movement. As a limit switch, it is used to detect the presence of an object, restrict an output, or monitor a position. The AV6322643 is typically used in simple applications where reliability and repeatability are a necessity.

The AV6322643 snaps open and closed in response to an actuation force. When the switch is acted upon, the internal mechanism snaps into position, causing a momentary interruption of the circuit. This interruption is known as a "make" or "break" state that can be used for a variety of applications. The switch has two positions, depression and rest. When the switch is in the depressed position, a latching mechanism is set, causing the contacts to open. When the force on the switch is removed, the contacts snap back to the rest position (closed). The snap action is what allows the AV6322643 to be used for position control in applications such as monitoring the location of a handle.

The AV6322643 also has the ability to be used as a proximity sensor, no contact switch. This function is referred to as "non-contact detection". With this feature, the switch can detect the presence of an object or signal without the need to physically actuate the switch. This is done by leveraging the magnetic attraction of a magnet to a reed switch. This type of switch is able to detect the presence of an object or signal when it is within a specific distance, often referred to as the "sensing distance". The sensing distance is adjustable and can be tuned to a specific range.

The AV6322643 can be used in a wide range of applications, from industrial machinery to automotive and aerospace applications. Its reliable and repeatable operation, small size and low cost make it an ideal choice for a wide range of applications. Its ability to detect a variety of motions and signals make it an ideal choice for applications where there is need for motion control, position sensing and non-contact detection.

The AV6322643 is constructed of an electromechanical device that produces a physical response to an input signal. The internal mechanism consists of a lever, an actuator and a contact arm connected to a spring. The spring supplies the restoring force necessary to move the actuator and reset the contact arms. The pivot point of the lever allows the actuator to move the contacts in either direction. The lever also serves as a mechanical stop that limits the travel of the actuator and contact arm.

The AV6322643 has an adjustable actuation force which allows for more precise control over its operation. The actuation force is set low enough to allow for minimal force to operate the switch, yet high enough to allow for reliable operation. The AV6322643 is also available in either normally open or normally closed versions. The normally open switch will open the circuit when actuated, while the normally closed switch will close the circuit when actuated.

Overall, the AV6322643 snap action, limit switch is a versatile and reliable switch that can be used in a variety of applications. Its snap action feature and adjustable force allow for precise control and reliable operation. Its small size and low cost make it an ideal choice for a wide range of applications. Its ability to detect a variety of motions and signals make it an ideal choice for applications where there is need for motion control, position sensing and non-contact detection.

The specific data is subject to PDF, and the above content is for reference