PR1502-T

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Diodes are a type of semiconductor component that allows electrical current to flow in one direction only. Rectifiers are a type of diode that convert alternating current (AC) into direct current (DC). Single rectifiers offer even greater control of current than multiple rectifiers in power applications where AC power is converted for use. The PR1502-T is a single rectifier designed for power conversion applications.

The PR1502-T has a reverse breakdown voltage of 150V, a maximum repetitive peak reverse voltage of 100V, a maximum average forward rectified current of 2A, and a maximum surge current of 20 amperes (A). It also features a fast recovery time and a low forward voltage drop. The device is capable of withstanding a severe overload of more than ten times the maximum current rating for one second. The operating temperature range for the device is between -55°C and 125°C.

The PR1502-T is ideal for a variety of power conversion applications, including switching power supplies, UPS systems, and pump drives. The device can be used in AC-to-DC, DC-to-DC, and AC-to-DC-to-DC conversion systems. Additionally, it can be used for inverter rectification, as well as protection against voltage surges.

The PR1502-T employs a conventional rectifier topology to facilitate current flow in only one direction. The device consists of an anode, a cathode, a junction between them, and a depletion layer, which acts as an insulator or dielectric material, preventing electrical current from passing through the diode when no voltage is applied. When a voltage is applied, the depletion layer is blocked and the diode starts to conduct current.

When forward biased, increases in voltage will cause the conductivity of the diode to increase, allowing more current to pass through it. As the voltage is decreased, the current decreases, as the depletion layer goes back to blocking the current. Conversely, when reverse biased, the depletion layer becomes thicker, and the current stops flowing as the voltage decreases.

The PR1502-T is also designed to be used in AC power rectification systems, where it is used to rectify AC signals into DC signals. The device uses four sets of diodes (DA, DB, DC and DD) laid out in what is known as a bridge configuration, allowing both positive and negative voltage to be converted into a DC signal. As AC volts go through the diodes, they alternately become forward and reverse biased, allowing current to flow in one direction only. This process creates a DC signal.

Overall, the PR1502-T is an ideal choice for power conversion applications where single rectifiers are needed. With its fast recovery time, low forward voltage drop, and high current and voltage ratings, the device offers superior performance over other single rectifiers on the market. It is well suited for use in AC-to-DC, DC-to-DC, and AC-to-DC-to-DC power conversion systems, as well as for inverter rectification and surge protection.

The specific data is subject to PDF, and the above content is for reference