V30120SGHM3/4W

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The V30120SGHM3/4W belongs to the family of Diodes - Rectifiers - Single. This family of diodes is composed of a single p-n junction diode and is used for rectifying power signals.

The V30120SGHM3/4W is a fast-recovery, low forward voltage drop, and soft recovery diode with a temperature range of -65 to +150 degrees Celsius. It is designed for use in high frequency rectification applications and the maximum ratings of the device are 20V and 6A with a maximum repetitive peak reverse voltage rating of 800V.

V30120SGHM3/4W can be used in various applications in the power electronics world and these include ac/dc power supply rectifiers, motor controls, high frequency switched-mode power supply (SMPS), and uninterruptable power supplies. It is also usually used for the rectification of both low and high frequencies, such as automotive and audio applications, as well as high frequency switched-mode DC and AC input rectification in home and office appliances.

The working principle of the V30120SGHM3/4W is fairly simple. When an ac voltage is applied to the diode, the applied voltage is dropped across the diode’s junction and then flows through the anode-cathode junction. The anode of the diode is connected to the positive side of the voltage source and the cathode is connected to the negative side. Once the voltage is applied, the diode starts to conduct in the forward direction and current begins to flow. The current flow is determined by the resistance of the diode as well as the voltage applied, as a higher voltage will allow a higher current to flow through the diode. When the applied voltage exceeds the reverse breakdown voltage, the diode breaks down and starts to conduct in the reverse direction, allowing current to flow in the opposite direction.

This diode is also designed to be able to produce soft recovery behavior, or “tail current”. This means that when the voltage across the diode decreases, the current does not immediately cease to flow; instead, it slowly drops over a certain period of time, allowing for smoother and an additional surge protection for power loads. This tail current will subside over time until it reaches a steady state with no current flowing through it.

The V30120SGHM3/4W is an extremely versatile diode that can be used in various applications. It is also designed to provide protection against spurious transient events and voltage spikes, as well as provide a low forward voltage drop and soft recovery characteristics.

The specific data is subject to PDF, and the above content is for reference