Allicdata Part #: | LNRTA110A-ND |
Manufacturer Part#: |
LNRTA110A |
Price: | $ 0.00 |
Product Category: | Industrial Controls |
Manufacturer: | Crouzet |
Short Description: | CNTRL LIQ LEV 110VAC SOCKETABLE |
More Detail: | Liquid Level Controller Constant Level SPDT (1 For... |
DataSheet: | LNRTA110A Datasheet/PDF |
Quantity: | 1000 |
1 +: | 0.00000 |
Mounting Type: | Socketable |
Termination Style: | Plug In, 11 Pin (Octal) |
Operating Temperature: | -10°C ~ 60°C |
Fluid Type: | Chemical Solutions, Coffee, Ice Cream, Purified Water, Salt Water, Waste Water |
Weight: | 0.441 lb (200.03g) |
Series: | NRT |
Part Status: | Obsolete |
Type: | Constant Level |
Voltage - Supply: | 110VAC |
Sensitivity: | 0 ~ 100kOhm |
Features: | Delay Timer |
Distance - Control To Sensor (Max): | 91.44m |
Output Type: | Relay |
Contact Form: | SPDT (1 Form C) |
Contact Rating @ Voltage: | 10A @ 250VAC |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
LNRTA110A controllers are used to manage and maintain liquid levels in residential and commercial tanks. They are typically used in small tanks such as boiler water tanks, oil tanks, and marine tanks. The controller uses a float-type probe to detect the level of liquid present in the tank and signals the float switch when the liquid reaches a predetermined level. The controller then automatically turns the pump on or off based on the signal from the float switch.
The LNRTA110A has a built-in microprocessor that allows for simple setup and programming. It can be programmed to operate a wide range of pumps, including submersible pumps, multi-stage pumps, and diaphragm pumps. It also includes an adjustable low level critical alarm that will activate if the liquid level drops to an unhealthy level. This alarm can be used to alert the operator of an impending failure or potential hazard.
The LNRTA110A controller works by using the pressure differential created by the liquid level in the tank. The pressure created by the liquid level is measured and sent to the controller, which then sends an appropriate signal to the pump to either start or stop pumping depending on the preset level. The pressure differential is created by the difference between the top and bottom of the tank. This pressure difference is used to accurately measure the level of liquid in the tank.
The LNRTA110A controller is designed for use in both marine and industrial applications. It is easy to install and provides a reliable and accurate solution for liquid level management. It is compatible with both AC and DC pumps and can be used with both grounded and non-grounded systems. The LNRTA110A controller is a reliable and economical solution for keeping liquid levels in commercial and residential tanks under control.
The LNRTA110A controller is a great choice for any application where accurate and reliable liquid level control is desired. It offers easy installation, a wide range of compatible pumps, and adjustable critical alarms. The controller is a cost-effective solution for managing the liquid levels in commercial and residential tanks.
The specific data is subject to PDF, and the above content is for reference
Part Number | Manufacturer | Price | Quantity | Description |
---|
LNRTA24A | Crouzet | 0.0 $ | 1000 | CONTROL LIQ LEV 24VAC SOC... |
LNRT110A | Crouzet | 0.0 $ | 1000 | CNTRL LIQ LEV 110VAC SOCK... |
LNRT220A | Crouzet | 0.0 $ | 1000 | CNTRL LIQ LEV 220VAC SOCK... |
LNRT24A | Crouzet | 0.0 $ | 1000 | CONTROL LIQ LEV 24VAC SOC... |
LNRTA110A | Crouzet | 0.0 $ | 1000 | CNTRL LIQ LEV 110VAC SOCK... |
LNRTA220A | Crouzet | 0.0 $ | 1000 | CNTRL LIQ LEV 220VAC SOCK... |
CNTRL LIQ LEV 120/240VAC DINRAILLiquid L...
SEAL LEAK DETECTOR/ 110-120V/Liquid Leve...
CONTROL LIQ LEV 120VAC 2SECLiquid Level ...
RELAY LEVEL CONTROLLiquid Level Controll...
RELAY LEVEL CONTROLLiquid Level Controll...
RELAY LEVEL CONTROLLiquid Level Controll...