Allicdata Part #: | 0011321581-ND |
Manufacturer Part#: |
0011321581 |
Price: | $ 61.75 |
Product Category: | Tools |
Manufacturer: | Molex, LLC |
Short Description: | CYLINDER |
More Detail: | N/A |
DataSheet: | 0011321581 Datasheet/PDF |
Quantity: | 1000 |
2 +: | $ 56.13300 |
Series: | * |
Part Status: | Active |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
In order to optimize the production process in industrial plants, automated solutions such as 0011321581 are becoming increasingly popular. This type of equipment belongs to the category of crimpers, applicators, presses, and accessories. They are designed to increase the efficiency and accuracy of the presses, while reducing operational costs and manual labor.
The working principle of 0011321581 type automated equipment is highly complex. It usually consists of four main stages, starting from the press bed where the material is placed and then pressed. After that, a stripper assembly pulls the material away from the press bed, leaving a prepared surface. Finally, the clamping die is actuated by either mechanical or hydraulic systems before the material is being removed.
In terms of applications, 0011321581 are used for a wide variety of operations. They can be used to press, emboss, stamp, form, and cut almost any material, including steel, aluminum, plastic, rubber, and ceramics. It can also be used for special operations such as swage riveting, heat staking, and forming. This type of equipment is typically used in the automotive, electronics, aerospace, and medical industries.
The most important part of the 0011321581 is the press bed. This is the part that supports the material during the entire operation. It is made up of two surfaces that are separated by an upper and lower pad. The upper pad is on the top side and it is the part that the material rests on. The lower pad is on the bottom side and it is the part that presses the material into place.
Depending on the type of material being pressed, the clamping force delivered can be changed. If the material is harder or thicker, then the force should be increased. On the other hand, softer or thinner materials should be pressed with lower clamping forces. This is important in order to ensure that the parts being pressed are done so correctly.
The die is another important part of the 0011321581. The die is the part that shapes the material during the pressing process. This can be done by either hydraulic or mechanical force. Depending on the type of material being pressed, the die should be designed specifically for it. The die should also be of a size that will fit the material, and also produce a specific shape.
In addition, the 0011321581 should be well-lubricated in order to ensure efficient and accurate operation. The lubricant should be specific to the type of material being processed. The lubricant should also be regularly changed in order to guarantee optimum performance of the press.
Overall, the 0011321581 is an invaluable tool for the manufacturing industry. It is designed to increase efficiency and accuracy, while reducing the need for manual labor. The wide variety of applications in various industries make it a very versatile and advantageous tool for many manufacturers. Furthermore, proper lubrication and die maintenance are essential for ensuring the press works effectively and correctly.
The specific data is subject to PDF, and the above content is for reference
Part Number | Manufacturer | Price | Quantity | Description |
---|
1050017:0011 | Phoenix Cont... | 1.65 $ | 603 | CONN ACC MARKER STRIP PRE... |
1051016:0011 | Phoenix Cont... | 1.65 $ | 597 | CONN ACC MARKER STRIP PRE... |
0804293:0011 | Phoenix Cont... | 4.54 $ | 135 | MARKER CARD PRINTED 11-20... |
1050020:0011 | Phoenix Cont... | 1.58 $ | 164 | ZACK STRIP 10-SECTION WHI... |
1051029:0011 | Phoenix Cont... | 1.65 $ | 99 | ZACK STRIP 10-SECTION WHI... |
0804109:0011 | Phoenix Cont... | 8.63 $ | 76 | ADHESIVE MARKER CARD 11-2... |
0809803:0011 | Phoenix Cont... | 1.64 $ | 98 | ZACK STRIP 10-SECTION WHI... |
0808671:0011 | Phoenix Cont... | 1.65 $ | 63 | ZACK STRIP 10-SECTION WHI... |
1052015:0011 | Phoenix Cont... | 2.51 $ | 1000 | CONN ACC MARKER STRIP PRE... |
0808626:0011 | Phoenix Cont... | 2.51 $ | 4 | ZACK STRIP 10-SECTION WHI... |
1401802:0011 | Phoenix Cont... | 2.52 $ | 79 | BNB ZACK STRIP 10-SECTION... |
1053014:0011 | Phoenix Cont... | 2.55 $ | 77 | CONN ACC MARKER STRIP PRE... |
1052028:0011 | Phoenix Cont... | 2.55 $ | 72 | ZACK STRIP 10-SECTION WHI... |
0801404:0011 | Phoenix Cont... | 2.6 $ | 57 | TERM BLOCK MARKERConnecto... |
0801406:0011 | Phoenix Cont... | 2.6 $ | 29 | TERM BLOCK MARKERConnecto... |
0804183:0011 | Phoenix Cont... | 4.86 $ | 73 | MARKER CARD PRINTED 11-20... |
0804073:0011 | Phoenix Cont... | 8.63 $ | 55 | ADHESIVE MARKER CARD 11-2... |
0803582:0011 | Phoenix Cont... | 17.26 $ | 13 | ZACK STRIP FLAT 100-SECTI... |
0808749:0011 | Phoenix Cont... | 1.57 $ | 25 | ZACK STRIP 10-SECTION WHI... |
0808765:0011 | Phoenix Cont... | 1.65 $ | 20 | ZACK STRIP 10-SECTION WHI... |
0808697:0011 | Phoenix Cont... | 1.65 $ | 1000 | ZACK STRIP 10-SECTION WHI... |
0805739:0011 | Phoenix Cont... | 2.47 $ | 24 | ZACK STRIP 10-SECTION WHI... |
0808804:0011 | Phoenix Cont... | 2.51 $ | 14 | ZACK STRIP 10-SECTION WHI... |
0803479:0011 | Phoenix Cont... | 2.51 $ | 13 | ZACK MARKER STRIP 11-20Co... |
0803480:0011 | Phoenix Cont... | 2.51 $ | 25 | ZACK MARKER STRIP 11-20Co... |
1401828:0011 | Phoenix Cont... | 2.52 $ | 20 | BNB ZACK STRIP 10-SECTION... |
55246-0011 | Molex, LLC | 0.0 $ | 1000 | CONN COMPACT FLASH CARD S... |
310-87-160-41-001101 | Preci-Dip | 2.03 $ | 264 | SOCKET 4.2 MM SOLDER TAIL... |
803-87-040-10-001101 | Preci-Dip | 2.05 $ | 1300 | SOCKET 7 MM SOLDER TAIL D... |
801-87-040-10-001101 | Preci-Dip | 2.05 $ | 821 | SOCKET 7 MM SOLDER TAIL S... |
851-87-025-10-001101 | Preci-Dip | 2.14 $ | 474 | SOCKET SOLDER TAIL SINGLE... |
310-87-164-41-001101 | Preci-Dip | 2.16 $ | 641 | SOCKET 4.2 MM SOLDER TAIL... |
315-87-164-41-001101 | Preci-Dip | 2.29 $ | 552 | PCB SKT LOW PRO SINGLE RO... |
831-87-050-10-001101 | Preci-Dip | 2.3 $ | 758 | SOCKET 4.2 MM SOLDER TAIL... |
803-87-050-10-001101 | Preci-Dip | 2.56 $ | 209 | SOCKET 7 MM SOLDER TAIL D... |
801-83-050-10-001101 | Preci-Dip | 3.97 $ | 906 | PCB CONN SOLDER TAIL50 Po... |
323-87-164-41-001101 | Preci-Dip | 4.19 $ | 400 | WW SCKT 4.9MM 3LEVEL SING... |
851-87-050-10-001101 | Preci-Dip | 4.28 $ | 445 | SOCKET SOLDER TAIL SINGLE... |
803-87-100-10-001101 | Preci-Dip | 4.65 $ | 1040 | SOCKET 7 MM SOLDER TAIL D... |
861-87-050-10-001101 | Preci-Dip | 5.4 $ | 367 | PCB CONN SOLDER TAIL 1MM5... |
RETAINER PLATE/STRIP CUTOFF
GAGE PIN ASSEMBLY
LOCATOR MINI EJECTOR
MEP-6T TOUCH SCREEN/MESSAGE SYST
SEATING TI ASSEMBLY
INSET TL ASSY 5 PR 14 COLUMN