002570111

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Fuseholders

Fuseholders are designed to house and contain fuse elements and provide an electrical connection to the circuit being protected. A fuseholder should be specific to the type of fuse that has been installed in the circuit, though it is possible to physically fit a different fuse into the holder than is specified.

As the purpose of the fuseholder is primarily to secure the fuse element, the contacts and the connection to the supply should be appropriate for the current being drawn in the circuit. Therefore, the design should ensure that sufficient contact surface is available for the amount of current being drawn and any overheating will be prevented.

A fuseholder may consist of several parts or simply be a single block. Generally there are two main components of the fuseholder, the contact block and the fuse element. The contact block is designed to complete the electrical circuit when a fuse is installed, and also provides physical protection and insulation to the wire connections.

The actual fuse part of the fuseholder is designed to hold the individual components that will complete the electrical circuit. This includes the fuse element itself, the pin and if required, a pressure contact plate. In order to ensure an effective electrical connection, the contacts should be rated to hold the maximum current expected, and also be able to reliably resist any overheating. The fuse element should be of a size suited to the amount of current being drawn.

Fuseholders come in a range of sizes, shapes, and design styles. Some designs are intended for fixed applications, others have multiple connection points so that they can move and be mounted on a panel. Some even include features such as vibration and shock protection.

Often the best way to make sure that the fuseholders are the right size is by using a sizing chart, as this will allow the user to check the size and ratings of the fuseholders before installing them. In some cases, the size limits may be exceeded, in which case, the fuseholder should be replaced.

Fuseholders are designed to provide a safe way to protect circuits from over-current conditions. They can also be used to protect circuits from potential electrical shorts or continuity faults. The most important design consideration is to ensure that the fuseholders can handle the current to be drawn, as this will prevent any potential problems arising from an overload.

The specific data is subject to PDF, and the above content is for reference