002621005

Series:	*
Part Status:	Active
Lead Free Status / RoHS Status:	--
Moisture Sensitivity Level (MSL):	--

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Introduction

The 002621005 application field and working principle is a subset of the electrical specialty fuses. This type of fuse is often used in applications requiring high current and precise accuracy. This type of fuse typically has two main components, the fuse wire and the fuse holder. The fuse wire can be classified according to several criteria, including current rating, voltage rating, mounting style, and insulation. The fuse holder, on the other hand, provide protection from electric arcs and make sure the current to flow in predetermined pathways.

Fuse Wire

The fuse wire is the most important component of the 002621005 and plays a vital role in its functioning. The fuse wire is made from a variety of metals, including copper, aluminum, nickel, and titanium. Depending on the application, the wire may also contain plastic or fiberglass insulation. The design of the fuse wire must consider many factors, including the current rating, voltage rating, mounting style, and insulation.The current rating of the fuse wire must be selected based on the application. This is typically expressed in amperes, and is based on the amount of electrical current the fuse must be able to handle without failing. The voltage rating of the fuse wire must also be selected, usually expressed in volts. When considering the mounting style, a common option is a blade connector, although screw connectors, soldered lugs, or a combiner plug can also be used. The insulation material and design of the wire must also consider the application, as it must provide adequate protection against short circuits, arcs, and other hazards.

Fuse Holder

The fuse holder must be chosen to match the characteristics of the fuse wire and the application. The holder must be able to securely mount the fuse wire in place while providing insulation against arcing and short circuits. In addition, it must be properly rated to provide the appropriate current to flow through the wires in a predetermined manner. The most common configuration for the holder is a dual-channel design, which allows two wires to cross over each other for greater flexibility.

Working Principle

When the 002621005 is connected to an electrical circuit, it acts as a sensing device. The fuse wire and holder allow electrical current to flow through the circuit until the rated current is exceeded. At this point, the fuse wire will melt and disconnect the circuit from any further current, thus preventing any further damage. The fused wire and holder will have to be replaced afterwards in order for the circuit to work again.

Conclusion

The 002621005 application field and working principle are an important part of the electrical specialty fuses. The fuse wire must be carefully selected based on the application, and the fuse holder must be able to securely mount the wire and provide adequate protection. Once connected to the circuit, the fuse will protect the circuit from any further damage caused by excessive current.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description