0078001019

Radio Frequency Interface (RFI) and Electromagnetic Interference (EMI) Contacts, Finger Stock and Gaskets are all components of the 0078001019 application field. These products are critical components as part of the system design which is intended to reduce noise and improve overall performance.

RFI Contacts are designed to reduce the level of radio frequency energy interference that is produced during normal operation and establishes a physical connection between the signal path components and the system. The contact material generally consists of copper or silver base metals with a special inserted material between the surfaces that offers high conductivity and low resistance, eliminating any potential for generating EMI.

Finger Stock is a metal strip that is designed to improve the contact area between components and improve electrical performance. It is usually manufactured from copper, copper alloys or stainless steel and is applied manually by sliding the strip into a pre-molded groove or through the application of pressure.

Gaskets are made from a variety of elastomers and thermoplastic materials that are intended to form a tight seal between components in order to ensure that no air or other contaminants can enter the system. The design of the gasket depends on the operating environment and the load applied to it.

In order to ensure that the system performs optimally, the contact materials must be chosen carefully to ensure that they can withstand the needed electrical performance. The design of the contact materials is generally based upon the application’s operating environment, including temperature, vibration, humidity and the loads that will be applied to the system.

In sum, 0078001019 application field requires components such as RFI and EMI contacts, finger stock and gaskets, to ensure that the system is properly shielded against outside interference, that the components are properly connected and that the system performs optimally. Each of these components must be selected based upon the given application and environment, as the wrong component can lead to a degraded system performance or worse, failure of the system.