8N4SV76FC-0078CDI

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Programmable timers and oscillators are an essential part of many electronic applications. They are used to provide precise timing control for various tasks, from switching on and off appliances, to controlling the speed of a motor, or providing signals for communication between parts of a system. The 8N4SV76FC-0078CDI is a programmable electronic clock designed to provide a precise and reliable timing solution for a wide range of applications.

Description and Use

The 8N4SV76FC-0078CDI is a highly accurate electronic clock designed to offer clock/timing solutions for numerous applications. The internal oscillator operates at a frequency of 8MHz (8.00Mhz) and has an operating temperature range of -25°C to +85°C. It comes with a range of adjustable parameters, such as adjustment of the pulse width (width of each pulse), and the ability to modify the clock frequency. The data can be programmed into the chip via the use of the I2C bus, making it a highly versatile solution.

The 8N4SV76FC-0078CDI is widely used in a variety of applications due to its high accuracy and flexibility. It is particularly useful for achieving lower-level synchronization in communications systems as it is capable of generating synchronized output signals with a resolution of 2.5ns. The chip can also be used for motor control and generating frequency output signals for various embedded systems. Other applications of the 8N4SV76FC-0078CDI include providing video synchronization signals for LCD TVs or other video displays, and providing network synchronization for network-based applications.

Working Principle

The 8N4SV76FC-0078CDI operates using a crystal oscillator, which generates a series of signals (known as pulses). These pulses are counted by an internal 16-bit up/down counter. The up/down counter starts and stops counting according to the parameters set by the user. It can also count in either a cyclic or one-shot mode. The output of the up/down counter is sent to the output pin where it is available as an accurate clock or timing signal.

The frequency of the output signal is determined by the parameters set by the user. It is possible to adjust the frequency of the output signal to any desired frequency within the range of 4MHz-8MHz. The pulse width and duty cycle of the output signal can also be adjusted. Additionally, the integrated temperature compensation circuit helps to ensure that the clock is running with a high degree of accuracy even under fluctuating or extreme thermal conditions.

Advantages and Drawbacks

The 8N4SV76FC-0078CDI provides an extremely accurate clock/timing solution due to its 16-bit up/down counter, integrated temperature compensation circuit and adjustable parameters. It is an ideal solution for a wide variety of applications, including those where reliable and precise timing is required. The adjustable pulse width, frequency and duty cycle ensure that the 8N4SV76FC-0078CDI can be adjusted to any desired parameters. This makes it suitable for a wide range of applications.

However, there are some drawbacks to the 8N4SV76FC-0078CDI. The device is more expensive than some alternatives, and the user must have knowledge of I2C bus programming in order to use the device. Additionally, the device can only be programmable when it is powered, which limits its applications in some cases.

Conclusion

The 8N4SV76FC-0078CDI is a highly accurate clock/timing solution, designed to provide accurate and reliable timing solutions for a wide range of applications. It is easy to program due to its adjustable parameters and can operate with a high degree of accuracy even under changing thermal conditions. It is an ideal solution for applications where precise timing is essential, and its adjustable parameters make it suitable for a wide range of applications.

The specific data is subject to PDF, and the above content is for reference