0151660783

Series:	Premo-Flex™ 15166
Part Status:	Active
Lead Free Status / RoHS Status:	--
Cable Type:	FFC, FPC
Moisture Sensitivity Level (MSL):	--
Number of Conductors:	9
Pitch:	0.020" (0.50mm)
Length:	9.000" (228.60mm)
Length - Exposed Ends:	0.157" (4.00mm)
Termination Style:	Top on Both Sides, Backers on Both Sides

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Flat Flex Cables

Flat Flex cables, also known as flex-ribbon cables, are very thin and often used in compatible mechanical and electronic components such as disjointed push-buttons and switches. They are mainly used in high-end applications because of their high flexibility and ability to be curled up into little rolls for easy storage and transportation. The cable itself is designed to have conductive contact which is flexible enough to move. The opposite ends of these cables are connected to a flat conductor which is a multi-faceted piece of metal, most commonly copper, which is designed to fit into certain components. To prevent damage, the strands of conductors are covered with a protective sheath. Flat Flex cables are usually simple to install, as the cable will naturally fit into the conductor. This makes them easy to assemble and troubleshoot if something goes wrong. In applications such as automobile manufacturing and aerospace, where parts often move in multiple directions or have to fit quickly into tight spaces, these thin and flexible cables can often be the only viable solution.

Ribbon Jumper Cables

Ribbon jumper cables are an alternative to flat flex cables, and can be used in a variety of applications. They are a thin, light weight cable with connectors on either end, and are designed to be used in tight, confined spaces due to their thin profile. Most often ribbon jumper cables are used to connect several pieces of electronic equipment together. The cable can be of different lengths, and depending on the type of connectors used, may be either male-to-male, or male-to-female, allowing several devices to be connected without having to use multiple cables or adapters. The cables are made from thin ribbons of bare copper with an insulating sheath around them. The insulating sheath is necessary to ensure that the cables do not short against any other wires when exposed to air. The insulation also helps prevent any accidental shorting between wires if the two different wires were to touch. Ribbon jumper cables also provide good shielding and noise resistance, due to their small size and flexibility. This allows them to be used in wide variety of environments where signal integrity is a concern. The cables are also good at dissipating heat due to their thin profile, which means that they can be used in applications with high temperatures without damaging the internal wiring.

0151660783 Application Field and Working Principle

Flat Flex and Ribbon Jumper Cables have found use in a number of different industries, from automobiles to aerospace, where their thin profile and flexibility has allowed them to be used in tight spaces that require wire routing. In the automotive industry, flat flex cables are often used as the wiring that connects the various components within the car, such as instrument clusters, radio systems and air-bag controls, due to their superior flexibility properties. In the field of aerospace engineering, ribbon jumper cables are often used for connecting airborne computers, sensors and control systems, due to their thin profile and excellent heat dissipation. This allows the cables to be used in very tight locations, such as between fuel tanks, without having to worry about damaging the cables due to high temperatures. The working principle of these cables is relatively simple. They both rely on thin strands of conductive wire either woven together or coiled up inside a protective sheath. This sheath is important as it prevents any accidental contact between the wires and ensures that the signal remains pure without any interference. The flat flex cables have a metal conductor on either end, which has multiple contact points, allowing the cable to fit into compatible devices without the need for any extra tools. The ribbon jumper cables have connectors on either end, allowing them to be connected to devices without the need for any extra tools.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description