0151661185

Series:	Premo-Flex™ 15166
Part Status:	Active
Lead Free Status / RoHS Status:	--
Cable Type:	FFC, FPC
Moisture Sensitivity Level (MSL):	--
Number of Conductors:	47
Pitch:	0.020" (0.50mm)
Length:	1.180" (29.97mm)
Length - Exposed Ends:	0.157" (4.00mm)
Termination Style:	Top on Both Sides, Backers on Both Sides

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Flat flex, Ribbon Jumper CablesFlat flex and ribbon jumper cables are the two major types of PCB cables used in the production of electronics. Flat flex cables are made from thin copper strands and are used when space is limited, as they are easily integrated into a circuit board design. Ribbon jumper cables are thicker and better suited for larger electronic assemblies.0151661185 Application FieldFlat flex and ribbon jumper cables are used in a variety of situations. They are commonly used in PCB prototypes, as they can be individually cut to the appropriate length and soldered in place. Flat flex cables are also used for routing signals and power lines within a PCB, while ribbon jumper cables are often used as a convenient way to connect components that are far apart.In addition, they can also be used to connect circuits on multiple interconnected circuit boards, such as on multi-layer PCBs. They are also used to interface between components on a motherboard and other PCBs, such as daughter cards and daughter boards.0151661185 Working PrincipleFlat flex and ribbon jumper cables work by providing an electrical connection between two terminals on different PCBs. The flat flex cables are made up of multiple small diameter strands of copper insulation, while the ribbon jumper cables are composed of a single larger diameter wire. The flat flex cables are held in place by a thin plastic sleeve that is soldered onto the PCB. The ribbon jumper cables are held in place using a small clip, which is usually a plastic or metal spacer that is pushed onto the ribbon cable and then affixed to the PCB.The two types of cables are typically used for different tasks. The flat flex cables are usually used for routing high speed signal lines, while the thicker ribbon cables are usually used to connect components that are farther apart from one another.ConclusionFlat flex and ribbon jumper cables are invaluable components in PCB designs, as they can provide a convenient solution for connecting components that are far apart or in close proximity. They are relatively simple to use and can be quickly and easily incorporated into a circuit board design. This makes them popular components among electronics engineers and hobbyists alike.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description