0151680221

Series:	Premo-Flex™ 15168
Part Status:	Active
Lead Free Status / RoHS Status:	--
Cable Type:	FFC, FPC
Moisture Sensitivity Level (MSL):	--
Number of Conductors:	16
Pitch:	0.049" (1.25mm)
Length:	6.000" (152.40mm)
Length - Exposed Ends:	0.197" (5.00mm)
Termination Style:	Top on Both Sides, Backers on Both Sides

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

0151680221 Application Field and Working Principle

0151680221 is a type of flat flex, ribbon jumper cables typically used in electronics, such as computers, circuit boards, and other electronic equipment. This type of jumper cable has an insulated flat cable ending in two wires, usually black and red. These cables are used for making temporary connections between two or more electronic components on a circuit board. Some modern computers and laptops use flat flex ribbon cables for internal connections of components.Flat flex jumper cables provide many advantages over traditional round jumper cables. They are typically thinner and smaller than round cables, allowing them to be used in tight or awkward spaces. Flat flex cables are also more flexible and much easier to route between components on a circuit board. This helps improve the reliability of the connection, as a single flat flex cable can be routed around curves and sharp corners without breaking.The working principle of a flat flex cable is similar to that of a round cable: electrical current flows through the cable from one end to the other when it is connected between two components. A flat flex jumper cable is slightly different than a round cable, in that it has two wires instead of one. This gives the flat cable some additional features. For instance, if a connection needs to be reversed (from the black wire to the red wire), the cable can be reversed quickly and easily without having to strip and re-crimp the connections. Furthermore, the two wires allow for the connection of two separate components, such as two different components on a circuit board.Flat flex cables are generally used in electronics to make temporary connections between two or more electronic components. For instance, they can be used to connect a circuit board to a power supply, or to provide a connection between two components on a circuit board. They are also used to provide short-term connections or to bridge a gap in a circuit.Because flat flex cables are used for temporary connections, they are typically made from a thin, insulated material that can withstand heat and other environmental conditions. They are also usually made in various lengths, depending on the application and number of components being connected.Flat flex jumper cables are a reliable and convenient solution for many different types of electrical connections. They are relatively inexpensive, making them a popular and affordable choice for many applications. They are also relatively easy to install, and can be made in various lengths, allowing them to be used in a variety of applications. Furthermore, they offer some additional features, such as the ability to reverse the connection between two components, and the ability to connect two separate components.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description