
Allicdata Part #: | 0190320114-ND |
Manufacturer Part#: |
0190320114 |
Price: | $ 374.22 |
Product Category: | Tools |
Manufacturer: | Molex, LLC |
Short Description: | DIE SET (SET 0F 4) (MMT-BB-575) |
More Detail: | N/A |
DataSheet: | ![]() |
Quantity: | 1000 |
1 +: | $ 340.20000 |
Series: | * |
Part Status: | Active |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
HOMMEL-ETAMIC\'s 0190320114 is a crimper applicator press that is mainly used in sheet metal settings. This applicator, which is available as either a floor-mounted machine or a manual machine, offers several advantages, including a well-designed operating mechanism, a reliable hydraulic system, and easy access to the die set for easy adjustment.
The tooling used in this crimper applicator press is similar to those used in conventional presses. The dies are made of hardened steel and accurately machined for a precise fit. The dies can be easily adjusted to allow for different sheet metal shapes and sizes. The press has a safety guard to protect operators from accidental injury.
This machine uses a simple hydraulic system to operate the press. A plunger is used to move the die up and down against the sheet metal, which is then crimped. The plunger is made up of two parts – a lower part which is stationary, and an upper part which moves up and down with each pressing cycle. The upper part contains two hydraulic cylinders which are connected to the lower part using shafts. The cylinders move the plunger up and down, while the shafts pull the plunger back in place when the pressing cycle is complete.
The 0190320114 is designed with a well-defined actuation system which works with both the machine and the die set. A cam is used to drive the plunger and move the die. The cam is attached to an electrical motor which is activated by a switch, and the cam runs along a rotating disk. Once the switch is activated, the cam moves the plunger up and down and the die is crimped.
The press also features a hydraulic system that can be used to adjust the pressure for different sheet metal sizes. This system is adjustable by a hand-held control or remotely by the machine operator. The hydraulic system also helps to maintain consistent pressure throughout the pressing cycle.
In addition to being used in sheet metal settings, the 0190320114 can also be used in plastic, wire, and thin metallic settings. The press is ideal for producing sheets and other materials with high surface-finish and accurate dimensions. This press is also commonly used for metal forming applications, such as forming pre-shaped parts, pressing pockets, and more.
The 0190320114 is a reliable and accurate crimper applicator press, which is designed for use in sheet metal settings. It offers a well-designed operating mechanism, a reliable hydraulic system, and easy access to the die set for easy adjustment. Thanks to these features, the press is perfect for creating sheet metal and plastic parts with high surface-finish and accurate dimensions.
The specific data is subject to PDF, and the above content is for reference
Part Number | Manufacturer | Price | Quantity | Description |
---|
0190780390 | Molex, LLC | 542.62 $ | 1000 | CRIMP DIE FOR 190780122 |
0190070024 | Molex, LLC | 0.34 $ | 250 | CONN QC RCPT 14-16AWG 0.2... |
0190040030 | Molex, LLC | 0.1 $ | 1000 | CONN QC TAB 10-12AWG 0.25... |
0190030156 | Molex, LLC | 17.12 $ | 1000 | CONN QC RCPT 18-22AWG 0.2... |
0190840009 | Molex, LLC | 0.07 $ | 4000 | CONN RING CIRC 14-18AWG #... |
0190740023 | Molex, LLC | 0.11 $ | 15975 | CONN RING CIRC 14-16AWG #... |
0190750002 | Molex, LLC | 0.13 $ | 6000 | CONN RING CIRC 18-22AWG #... |
0190670067 | Molex, LLC | 0.67 $ | 790 | CONN RING CIRC 6AWG #8 CR... |
0190760001 | Molex, LLC | 0.13 $ | 1000 | CONN RING CIRC #6 CRIMPRi... |
0190280106 | Molex, LLC | 193.35 $ | 1000 | ACP-101 CUTOFF-DIES (I2) |
0190310171 | Molex, LLC | 241.69 $ | 1000 | UPPER CONDUCTOR DIE |
0190310016 | Molex, LLC | 280.67 $ | 1000 | TOP CUTTER .156 REC. (190... |
0190090007 | Molex, LLC | 0.08 $ | 2500 | CONN QC RCPT 18-22AWG 0.2... |
0190080009 | Molex, LLC | 0.08 $ | 1000 | CONN QC RCPT 18-22AWG 0.1... |
0190030122 | Molex, LLC | 0.08 $ | 1000 | CONN QC RCPT 18-22AWG 0.2... |
0190100029 | Molex, LLC | 0.1 $ | 1000 | CONN QC RCPT/TAB 10-12AWG... |
0190730073 | Molex, LLC | 0.09 $ | 18000 | CONN RING CIRC 14-16AWG #... |
0190690036 | Molex, LLC | 0.06 $ | 8000 | CONN RING CIRC 18-22AWG #... |
0190690209 | Molex, LLC | 0.22 $ | 1970 | CONN RING CIRC 10-12AWG #... |
0190690115 | Molex, LLC | 0.05 $ | 2000 | CONN RING CIRC 14-16AWG #... |
0190690113 | Molex, LLC | 0.05 $ | 10000 | CONN RING CIRC 14-16AWG #... |
0190540033 | Molex, LLC | 0.18 $ | 1690 | CONN RING CIRC 18-22AWG #... |
0190560023 | Molex, LLC | 0.22 $ | 3950 | CONN RING CIRC 18-22AWG #... |
0190700063 | Molex, LLC | 0.25 $ | 3500 | CONN RING CIRC 14-16AWG #... |
0190700122 | Molex, LLC | 0.16 $ | 1000 | CONN RING CIRC 10-12AWG #... |
0190380049 | Molex, LLC | 0.11 $ | 1000 | CONN TERM RCPT 14-16AWG C... |
0190340042 | Molex, LLC | 0.12 $ | 1000 | CONN TERM PIN 18-22AWG CR... |
0190690110 | Molex, LLC | 0.05 $ | 1000 | CONN RING CIRC 14-16AWG #... |
0190690066 | Molex, LLC | 0.1 $ | 1000 | CONN RINGRing Terminal Co... |
0190770024 | Molex, LLC | 0.11 $ | 1000 | CONN RING CIRC 14-16AWG #... |
0190540093 | Molex, LLC | 0.16 $ | 1000 | CONN RING CIRC 14-16AWG #... |
0190700124 | Molex, LLC | 0.18 $ | 1000 | CONN RING CIRC 10-12AWG #... |
0190270088 | Molex, LLC | 280.67 $ | 1000 | DIES SPLICES 10-12AWG 14-... |
0190280040 | Molex, LLC | 467.78 $ | 1000 | DIE SET (4) (ACP-BB-596) |
0190310030 | Molex, LLC | 193.35 $ | 1000 | BOTTOM CUTTER (190310030) |
0190475820 | Molex, LLC | 280.67 $ | 1000 | DIE LOCATOR PLATE |
0190476110 | Molex, LLC | 102.91 $ | 1000 | ATP201 RAM MACHINING |
0190535203 | Dialight | 0.0 $ | 1000 | CAP LARGE PANEL INDICATOR... |
0190230005 | Molex, LLC | 0.18 $ | 2013 | CONN QC TAB 18-22AWG 0.25... |
0190190001 | Molex, LLC | 0.29 $ | 2254 | CONN QC RCPT 18-22AWG 0.1... |
RETAINER PLATE/STRIP CUTOFF

GAGE PIN ASSEMBLY

LOCATOR MINI EJECTOR

MEP-6T TOUCH SCREEN/MESSAGE SYST

SEATING TI ASSEMBLY

INSET TL ASSY 5 PR 14 COLUMN
