0210390400

Flat Flex, Ribbon Jumper Cables

0210390400 application field and working principle.

Flat Flex, Ribbon Jumper Cables are a popular type of cabling used in the communications industry. They provide an efficient method of connecting devices, and can be used for a variety of purposes such as interconnecting telecom equipment, cellular phones, VoIP systems, and data systems. This type of cabling is also popular in consumer electronics, including watches, calculators, and some types of medical instruments.

Flat Flex cables are constructed with a very thin, flat ribbon of conductive material, usually copper or silver, which is encased in an insulating jacket. The conductive ribbon can have one or many conductors, depending on the application. The ribbon is generally flexible and can be bent and routed around obstacles, resulting in a highly versatile type of cabling.

Flat Flex cables are generally used for short distance interconnects, such as those found in Telecom, Data, Voice, and Ethernet networks. The core specifications of the cables include a resistance rating, conductive surface area, dielectric voltage withstand capability, and contact resistance. All these specs must be within the requirements of the application. For example, a telecom or data cable should have a high level of resistance, less than 2 mΩ per contact, and a low loss of signal.

Flat Flex cables typically use two contacts: An «outer» shell contact and an «inner» shell contact, which are separated by an insulating material. This setup increases the cable’s resistance and also increases the cable’s overall capacity to carry a current. With this two-contact setup, signals can travel through both contacts simultaneously, which allows for faster transmission speeds.

The working principle of Flat Flex, Ribbon Jumper Cables is basically the same as that of other types of cabling. The conductive material is wrapped around a dielectric material so that the signal is able to propagate through the entire cable. The dielectric material also helps to support the cable, increasing its strength and reducing its susceptibility to mechanical stresses. The contacts between the conductors are generally covered in insulation or covered with a protective sleeve to protect against corrosion and deterioration.

Flat Flex cabling is used in numerous applications, ranging from telecommunications to consumer electronics. It has become an important part of telecommunications networks, due to its versatility and efficiency. Its compact design and high-speed transmission capabilities make it a natural choice for many types of applications, including data centers and communications systems.

Flat Flex, Ribbon Jumper Cables provide a cost-effective, reliable and versatile solution for a variety of applications. They are strong and reliable, and are capable of withstanding mechanical stress. They can also provide a cost-effective method of connecting devices, and are suitable for a wide range of applications.