0263001.WRT1L

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Fuses are electrical safety devices that are used to protect electrical components against potential damage due to overcurrent. They work by sensing when an overload of current is flowing and breaking the electrical circuit, thereby preventing further damage from occurring. The 0263001.WRT1L is an example of a high voltage fuse that is commonly used in industrial applications which require a higher level of protection.

This type of fuse is specially designed for use on High Voltage networks, up to 17.5 kV, and is suitable for all networks from 11kV to 33kV. It has a rated current of 10A nominal, and a maximum breaking capacity of 50kA at 17.5 kV. This means that it is suitable for protection against very high currents.

The 0263001.WRT1L contains a set of metal strips, each with a different current limit. When the current passes through the fuse, the electrical arc jumps from one strip to the next, dissipating the excess energy and preventing damage to the protected equipment. This type of fuse has a quick response time, meaning that it can react quickly when presented with an overload, and provide maximum protection.

In order to ensure adequate protection, a 0263001.WRT1L fuse must be properly sized for the application. Too large a fuse can cause damage to the equipment being protected, while too small a fuse may not be able to handle the amount of current required. The fuse should also be confirmed to carry the maximum current that could flow through the circuit. The current limits indicated on the fuse must not be exceeded since this could potentially cause serious damage to both the equipment and the fuse.

In addition to providing protection against overcurrent, 0263001.WRT1L fuses can also be used to provide protection against short-circuiting. This is done by using a type of fuse known as a short-circuit fuse. These fuses are typically designed with a lower current-carrying capacity than regular fuses, and are designed to break the circuit quickly when there is a short-circuit. In addition, this type of fuse is often easier to replace than a regular fuse, since it uses a cartridge-type design instead of a soldered connection.

The 0263001.WRT1L fuse is an important safety device used in many industrial and commercial applications. Its ability to provide protection from both overcurrent and short-circuit conditions make it an ideal choice for protecting valuable equipment and systems. When selecting a fuse for your application, it is important to ensure that it has the appropriate current rating and breaking capacity, so that it can provide the maximum level of protection.

The specific data is subject to PDF, and the above content is for reference