0295030.MXJ

0295030.MXJ Application Field and Working Principle

An MXJ-type 0295030 fuse is a current-limiting fuse designed to provide a quick, local response to both overload and short-circuit conditions. It is suitable for applications up to 600 volts. It is an even-characteristic fuse, meaning that the same current value will cause the fuse to blow at either low or high voltage.

Application Field

The MXJ-type 0295030 fuse has a wide range of applications due to its fast-acting characteristics and low current rating. It can be used for protecting components in power distribution circuits, such as AC units, washing machines, ovens, and other large appliances. It can also be used for single-phase supply circuits for equipment and circuit breakers. Furthermore, it can be employed for protecting components in DC circuits, such as motors, instrumentation, computers, and other control equipment.

Working Principle

The MXJ-type 0295030 fuse works by having a thin, low-resistance metal strip housed inside a ceramic body. This metal strip acts as an intermediary between the two terminals and heats up when current passes through. When the current reaches a set level, the heat generated by the metal strip causes a reaction that melts the metal, creating an open circuit and passing the current on to ground. This causes the fuse to blow, thus preventing any further electric current from flowing.

The fuse is designed to allow a certain amount of current to flow before it trips. This is called its ampere rating and is typically marked on the body of the fuse. In the case of the MXJ-type 0295030 fuse, it has a maximum ampere rating of 3.5 amps. Most fuses also have a “time-delay” rating, which is the amount of time it takes for the fuse to open when its current rating is exceeded. The MXJ-type 0295030 fuse has a time-delay rating of 10 seconds.

Conclusion

The MXJ-type 0295030 fuse is a current-limiting fuse that is suitable for use in AC and DC circuits up to 600 volts. It has a fast-acting action and can protect components from overload and short-circuit conditions. It has a maximum ampere rating of 3.5 amps with a time-delay rating of 10 seconds. This makes it ideal for use in a variety of applications, including power distribution circuits, single-phase supply circuits, motors, computers, and other control equipment.