Allicdata Part #: | 031-0561-041-ND |
Manufacturer Part#: |
031-0561-041 |
Price: | $ 0.00 |
Product Category: | Uncategorized |
Manufacturer: | ITT Cannon, LLC |
Short Description: | ER CON 4 SKT F80 ALUMEL |
More Detail: | N/A |
DataSheet: | 031-0561-041 Datasheet/PDF |
Quantity: | 1000 |
1 +: | 0.00000 |
Series: | * |
Part Status: | Active |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
031-0561-041, also known as magnetic particle inspection, is a versatile non-destructive testing (NDT) method used to detect and evaluate defects in ferromagnetic materials. It is used in industrial applications such as quality control, engineering, robotics, and more due to its ability to detect surface and sub-surface discontinuities or flaws.
The 031-0561-041 method is one of the more popular and versatile nondestructive testing methods since it can detect flaws without destroying the part under inspection. It can detect surface, subsurface and internal flaws in magnetic materials such as cast iron, stainless steel, cobalt and nickel alloys, and can be done on a variety of components including gears, shafts, blocks, pipes, cylinders, rods, and wires.
The working principles of the 031-0561-041 inspection are based on the magnetic susceptibility of ferromagnetic materials. Magnetic-susceptible materials can be magnetized with a magnetic field, and when a flaw is present the field takes a distorted pattern around the location of the flaw, producing a magnetic flux leakage pattern. These magnetized patterns are then revealed by applying a fine powder of iron oxide or other magnetic-sensitive particles.
In order to detect and evaluate flaws, an electromagnet or permanent magnet is used to induce a magnetic field. The magnetized parts are then covered with the magnetic-sensitive powder and any fields that leak out from the part will cause the particles to be attracted and aggregated onto the area of the leak. The aggregations of the powder can then be visually inspected and measured, providing valuable information about the flaws present in the part.
The 031-0561-041 inspection method is widely used in multiple industries and can be used to detect even very small flaws not detectable by other inspection methods. It is used in aerospace, automotive, installation and maintenance, aerospace, shipbuilding and general engineering for quality control, inspection and testing. In addition, it can also be used to detect cracks, porosity, inclusions, lubricant pockets, smears on the surface, welding defects and subsurface defects.
The 031-0561-041 inspection method is versatile, fast and cost-effective, making it an attractive option for industrial manufacturers. It is also relatively easy to perform and does not require extra equipment. Furthermore, it is often possible to make inspections with the parts in-situ, making it a time-saving testing method for many industries.
In conclusion, the 031-0561-041 inspection method is one of the most attractive and widely used non-destructive testing methods for the detection of ferromagnetic flaws. It is used in multiple industries for multiple applications due to its accuracy, speed and low-cost of operation. Its versatile and cost-effective nature makes it an attractive testing option for industrial manufacturers.
The specific data is subject to PDF, and the above content is for reference
DIODE GENERAL PURPOSE TO220
CB 6C 6#16 SKT RECP
CA08COME36-3PB-44
CA-BAYONET
CB 6C 6#16S SKT PLUG
CAC 3C 3#16S SKT RECP LINE