Allicdata Part #: | 1144-1006-ND |
Manufacturer Part#: |
03DWCG5 |
Price: | $ 7.92 |
Product Category: | Filters |
Manufacturer: | Delta Electronics |
Short Description: | LINE FILTER 115/250VAC 3A CHAS |
More Detail: | N/A |
DataSheet: | 03DWCG5 Datasheet/PDF |
Quantity: | 1000 |
84 +: | $ 7.20223 |
Operating Temperature: | -25°C ~ 100°C |
Mounting Type: | Chassis Mount |
Termination Style: | Quick Connect |
Inductance: | L1 - 1mH, L2 - 30mH |
Series: | DW |
Part Status: | Active |
Filter Type: | Single Phase |
Configuration: | Two Stage |
Voltage - Rated DC: | -- |
Voltage - Rated AC: | 115V, 250V |
Current: | 3A |
Frequency - Operating: | 50/60Hz |
Applications: | General Purpose |
Approvals: | CSA, UR, VDE |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
Power Line Filter Modules are an important component of any electrical system, as they are designed to provide power protection and line noise reduction for both commercial and residential applications. The 03DWCG5 Power Line Filter Module is designed to provide power protection and line noise reduction for high-frequency applications, such as banks, hospitals, communications systems, and industrial control systems.
The 03DWCG5 is designed to reduce the impact of both common-mode interference and transverse-mode interference within the grid. Common-mode interference occurs when a high-frequency waveform interferes with the ground level, while transverse-mode interference is caused by electromagnetic waves that travel between different power lines. Both of these forms of interference can cause errors in communication systems, inconsistency in the control of industrial processes, and hardware damage.
The 03DWCG5 Power Line Filter Module is designed with two distinct components: the filter and the motor. The filter is designed to provide protection from interference at the power line by filtering out any interference signals with a frequency above the filter’s cutoff frequency. The motor is designed to provide additional protection from interference by providing an impedance that is low enough to absorb the interfering signals without allowing them to pass through to the load.
In order to maximize its efficiency, the 03DWCG5 Power Line Filter Module is designed with two capacitors and two inductors embedded into the filter. These components are designed to shift the resonant frequency of the filter, allowing it to filter out high-frequency interference signals and reduce the noise at the power line. This allows the system to provide a clean, interference-free power supply to its load. The power motor is designed with a variable-speed motor, which allows it to adjust its impedance in order to absorb any interference signals that may pass through.
The 03DWCG5 Power Line Filter Module is a versatile and cost-effective solution for high-frequency applications. It is designed to filter out interference signals at higher frequencies, while the motor provides additional protection from interference. The use of the two embedded capacitors and two inductors allows for a wider filter bandwidth and the variable-speed motor helps the system adjust its impedance for maximum effectiveness. The 03DWCG5 provides a reliable and cost-effective method of eliminating power line interference and providing power protection for high-frequency applications.
The specific data is subject to PDF, and the above content is for reference
Part Number | Manufacturer | Price | Quantity | Description |
---|
03DWCG5 | Delta Electr... | 7.92 $ | 1000 | LINE FILTER 115/250VAC 3A... |
LINE FILTER 250VAC 20A CHASS MNT
LINE FILTER 125/250VAC 4A TH
LINE FILTER 500VAC 100A CHASSIS
LINE FILTER 480VAC 50A CHASS MNT
LINE FILTER 480/520VAC 36A CHASS
LINE FILTER 480VAC 65A CHASS MNT