0466.125NRHF

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The 0466.125NRHF is an insulated non-rimming, slow acting fuse typically used in the power distribution systems or motor chargers of many industries. Its primary purpose is to protect the downstream equipment from receiving too much current when there is a power surge or faulty equipment causing an imbalance. It is configured in single or three-phase applications.

A 0466.125NRHF is made of a high-resistance material such as a ceramic or glass, with two independent metal electrodes. The electrodes act as the bridge between the two electrical poles of the fuses, allowing current to flow through and be regulated by the fuse, depending on the application.

The 0466.125NRHF is designed to protect the downstream equipment from high current surge due to overloads, short circuits, or mechanical defects in the system. The fuse will blow off the power if the current is too high, thus preventing further damage to the downstream equipment. However, due to the slow-acting nature of the fuse, it may not blow the power immediately, and unless immediately identified, the fuse may be compromised. Therefore, a maintenance check and periodic check of the fuses is recommended.

The 0466.125NRHF is most commonly used in power distribution systems, where the fuse rating should match the system voltage rating, as well as the current rating for the fuse. This ensures that the fuse is not exposed to a higher current than it is designed for, as a higher current load could cause damage to the fuse and any downstream components. The specific fuse rating should be selected based on the circuit and equipment to be protected.

The working principle of the 0466.125NRHF is simple. When a current overload occurs, the metal inside the fuse melts and cuts off the power. Depending on the application, the fuses may be designed to blow at a specific voltage or current rating. When this happens, the fuse is replaced with a new one, restoring the power to the equipment.

In conclusion, the 0466.125NRHF is a fuse specifically designed for power distribution systems or motor chargers, offering protection against current overloads. Its two metal electrodes link the two electrical poles, allowing the regulated amount of current to flow through and protect the downstream components. The fuse rating should match the system voltage and current rating to ensure optimal performance and protection.

The specific data is subject to PDF, and the above content is for reference