0498060.MX1M5

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Fuses

Fuses are electrical or electronic components which protect the electrical power network and other components from sudden electrical over-voltage or excessive current. In most cases they act as a safety device and are fitted to prevent shorts and unwanted fire.

0498060.MX1M5 is a type of fuse specifically designed to provide protection against over-voltage in electrical and electronic circuits. It features fast-acting, low-resistance, time-delay elements which provide optimal protection against surges and over-currents.

Application Field

The 0498060.MX1M5 fuse is primarily used for protecting control circuits. Its fast-acting mechanism is ideal for protecting circuits from short-term overloads, while its low-resistance construction makes it highly suitable for applications involving low-impedance circuits or where long delays would be unacceptable.

This type of fuse is also suitable for protecting high-power circuits with a long-term overload capability. It is also suitable for line and branch circuits with frequent fuse operation.

Working Principle

The working principle of the 0498060.MX1M5 fuse is based on a mechanism of time-delay heating of the fuse element. The fuse element in this type of fuse is made up of a metal alloy which has been carefully designed to have a low melting temperature and high thermal conductivity.

When current flow through the fuse, the fuse element heats up and starts to fuse. As the current increases, more heat is generated which then further increases the fuse element\'s temperature, causing it to rapidly fuse. This process avoids false trips which may otherwise occur due to temporary overcurrents in the circuit.

Once the current reaches its rated value, the fuse element will start to fuse immediately, thus protecting the circuit from any further damage. It also prevents the branch circuit from being re-energized until after the fuse has been replaced.

Safety Considerations

When installing a 0498060.MX1M5 fuse, it is important to consider the safety aspects of the system. The fuse must be correctly rated to make sure that it can handle the load it will be expected to protect against. If a fuse is rated too low, then it may not be able to prevent overloading of the circuit, which may lead to dangerous situations.

It is also important to ensure that all wiring for the circuit is correct prior to installing the fuse. Any faults in the wiring can lead to poor performance of the fuse, which in turn could lead to overloading of the circuit.

Finally, before replacing a 0498060.MX1M5 fuse, it is important to ensure that all power to the circuit is switched off. Failure to switch off the power can result in electric shock or fire, and could also damage the fuse.

Conclusion

The 0498060.MX1M5 fuse is an efficient and reliable fuse that provides protection against over-voltage in electrical and electronic circuits. Its fast-acting, low-resistance, time-delay elements make it ideal for applications involving low-impedance circuits and for protecting circuits with frequent fuse operation. It is important to ensure that the fuse is correctly rated and installed, and that all wiring for the circuit is correct, prior to installation in order to ensure the highest levels of safety.

The specific data is subject to PDF, and the above content is for reference