0512960833

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Flat Flexible Connectors, usually referred to as FFCs, FPCs or flex connectors, are specialized two-dimensional (2D) flat cables used to connect printed circuit boards (PCBs), components, and other electronic devices together. FFCs are thin and flexible, allowing for connection of PCBs and components that are in close proximity, while eliminating the need for bulky wiring, enabling an embedded design.

What is 0512960833?

0512960833 is a type of FFC connector commonly used in a wide range of applications. It has a 2.54 mm pitch with 8 positions and 33 contacts that are rated up to 1.27 A. Additionally, its 1.27 mm contact spacing and 19.7 mm width make it suitable for small-scale, low-profile applications.

Application Fields

FFC connectors are widely used in fields such as computers, consumer electronics, medical electronics, industrial automation, and robots. For example, they are commonly used in communications systems, medical imaging systems, and robotics. Additionally, they are widely employed in a variety of applications such as automotive systems, home appliances, camera systems, gaming systems, and so on.

Working Principle

FFCs use a series of contact fingers that are located on the side or top of the cable. The contact fingers are soldered to the PCB and are then covered with a plastic-like material. The other side of the FFC is connected to a mating component or to another PCB. When the two sides of the FFC are connected together, the contact fingers establish a electrical connection. Besides, FFCs are able to endure high-vibrations and shocks since they do not require soldering to the PCB. Additionally, they reduce the amount of space required to connect components and densely packed PCBs.

Advantages

FFC connectors are widely favored due to their numerous advantages. Firstly, they are extremely thin and lightweight, which allows them to fit into tight spaces where cables and wires cannot go. Secondly, FFCs are also able to endure high-vibrations and shocks due to their lack of soldering. Thirdly, FFC connectors are much more reliable and cost effective than cables and wires, and they also take up much less space in crowded applications. Lastly, FFCs are easier to install than wired connections since they do not require soldering.

Disadvantages

However, FFC connectors are not without their drawbacks. Firstly, they are not as strong as wired connections and the contact pins can be easily damaged if exposed to mechanical pressure, such as from pressing and bending. Secondly, FFC connectors may require additional robust components to support them, which could lead to increased costs. Lastly, FFC connectors may not be suitable for some high-voltage applications due to their contact spacing.

The specific data is subject to PDF, and the above content is for reference