0518CDMCCDS-150MC Inductors, Coils, Chokes

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The 0518CDMCCDS-150MC is a component type fixed inductor, which is typically used to store energy in a magnetic field. It is typically attached to other components, such as resistors, capacitors, and transistors, to help regulate and improve the performance of other electronic circuitry. It can also be used as a filter capacitor, inhibitor, peak detector or among others in industrial and commercial applications.

An inductor is a type of electronic component that is used to store energy in the form of an electromagnetic field. The inductor consists of a coil of wire that has an electrical current running through it, which creates a magnetic field. The 0518CDMCCDS-150MC inductor typically has a core material that is either a ferromagnetic material, such as iron or steel, or an air gap. The core material determines the inductance value of the component.

The inductance property of the 0518CDMCCDS-150MC is measured in units of henries (H). It has a resistance of 150 mOhms (milli-ohms) and a current rating of 5 A (amps). The inductor also has an operating temperature of -40 to +105 degrees Celsius (-40 to +221 degrees Fahrenheit). The 0518CDMCCDS-150MC is available in a surface-mount configuration and has a maximum height of 4.3mm, a maximum width of 5.2mm, and a maximum length of 8mm.

The 0518CDMCCDS-150MC inductor is used in many applications, including signal conditioning (for example, to reduce interference or noise), Sensor interfacing (to measure, for example, temperature, pressure, humidity, flow, voltage, or current), resonant circuits, high voltage applications, high frequency applications, and Pulse-width modulation (PWM).

The typical working principle behind the 0518CDMCCDS-150MC inductor is based on Faraday’s law of induction. This law states that when a current is applied to a conductor, a changing magnetic field is created around the conductor. This change in the magnetic field induces voltage, which is measured in units of volts (V). The induced voltage is equal to the rate of change of the magnetic field times the number of turns in the conductor. This induced voltage is then used to produce current, which is referred to as Faraday’s law of induction current. This current is used to provide power to circuits while the voltage provides information. Additionally, this current also helps dissipate energy in the form of heat, which helps protect the device from damage.

In conclusion, the 0518CDMCCDS-150MC fixed inductor is a component type used for a variety of applications, such as signal conditioning, sensor interfacing, resonant circuits, high voltage applications, high frequency applications, and PWM. It consists of a coil of wire with an electrical current running through it, which creates a magnetic field around the conductor. Faraday’s law of induction states that a changing magnetic field around the conductor induces a voltage across the conductor. The induced voltage is then used to produce current, which provides power and information to the device. The 0518CDMCCDS-150MC has a resistance of 150 mOhms (milli-ohms) and a current rating of 5 A (amps). It is typically attached to other components, such as resistors, capacitors, and transistors, to help regulate and improve the performance of other electronic circuitry.

The specific data is subject to PDF, and the above content is for reference