| Allicdata Part #: | 0573535000-ND |
| Manufacturer Part#: |
0573535000 |
| Price: | $ 416.51 |
| Product Category: | Tools |
| Manufacturer: | Molex, LLC |
| Short Description: | TOOL HAND CRIMPER FIREWIRE SIDE |
| More Detail: | Hand Crimper Tool Firewire (IEEE 1394) Contacts Si... |
| DataSheet: |  0573535000 Datasheet/PDF |
| Quantity: | 1000 |
| 1 +: | $ 378.64300 |
| Series: | -- |
| Part Status: | Active |
| Tool Type: | Hand Crimper |
| For Use With/Related Products: | Firewire (IEEE 1394) Contacts |
| Features: | Side Entry, Ratchet |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
A 0573535000 is an advanced crimper that can be applied in various fields. It is an automated articulating crimper with two configurations. The first configuration is articulated, which allows crimping without losing the integrity of the crimped contacts. This specific crimper has an elliptical strike pattern, which means the crimp will lay on both flat sides of an elliptical pattern. This allows for higher consistency in crimping compared to other crimp applications.
The 0573535000 has two components, the drive unit and the articulating attachment. The drive unit is a motorized device that controls the speed and force of the crimper. It applies a set force to the crimped contact, predetermined via its software and settings. This force, as well as the programmed crimp force settings, determines the consistency and reliability of the crimped contact.
The singular articulating attachment works to maintain the crimped contacts in position when the feed tube is retracted. This tool crimps at a set angle, which varies depending on the size and type of the crimped contact. This ensures a consistent force is applied during crimping. It also ensures the crimp remains in position until the application is completed, eliminating any risk of uneven crimps.
The 0573535000 is an automated applicator system that can be used for a variety of applications. These applications range from electrical connectors to electrical components. This system is used to control the amount and consistency of a product or component being applied to a desired location. The 0573535000 can be used for both manual and automated applications. It is specifically designed to operate under extreme environments and is equipped to achieve consistently accurate results.
This automatic applicator uses a drive unit to control the amount of product or component it applies. It can be programmed to apply a predetermined quantity of material, as well as to control the consistency of the applied material. The applicator is also outfitted with a manual application feature, allowing for greater control over the application process. Additionally, the application\'s system is designed to be able to move quickly, allowing for the application of multiple components in one cycle.
The 0573535000 features multiple control parameters, which can be adjusted depending on the application. This varying control allows for a more tailored application result, allowing for greater accuracy and consistency. Additionally, this system requires minimal calibration and maintenance, allowing for convenience and cost savings.
The 0573535000 is an industrial press that is used for a variety of applications, ranging from manufacturing of electronic components to the piercing of metal alloys. Industrial presses are used to exert a large force to a specific part of an object. This force can be used to cut, form, or otherwise alter an object, depending on the desired application. Industrial presses are designed to be accurate and consistent, withstanding extreme pressures and stresses.
The 0573535000 is an industrial press that features an automated system. The press is equipped with a drive unit that is responsible for controlling the press\' speed and force settings. These settings, when adjusted, determine the amount of force applied to an object. Depending on the type of application, the force settings can be adjusted for higher or lower pressures. Additionally, the press can be programmed to exert a one-time force or multiple forces, depending on the desired result.
The 0573535000 industrial press is equipped with sensors that measure the amount of pressure applied. This pressure can then be adjusted for the desired application. Additionally, this press also features a safety system that prevents the press from exceeding the programmed force limits. This system is designed to both protect the press from potential damage and keep the applied force accurate and consistent.
The specific data is subject to PDF, and the above content is for reference
| Part Number | Manufacturer | Price | Quantity | Description |
|---|
| 101-0573 | Digi Interna... | 0.0 $ | 1000 | COMPUTER SNGL BD BL2101 5... |
| VOL-0573 | 3M | 267.67 $ | 1000 | VF-45 AND KEY MNTNANC CLN... |
| 0573195000 | Molex, LLC | 495.85 $ | 1000 | H-TOOL 535Tool |
| 0573600000 | Weidmuller | 102.38 $ | 1000 | BOX ALUM UNPAINTED 10.24"... |
| 0573700000 | Weidmuller | 144.79 $ | 1000 | BOX ALUM UNPTD 11.02"L X ... |
| 0573200000 | Weidmuller | 11.14 $ | 1000 | BOX ALUM UNPAINTED 1.97"L... |
| M39006/22-0573 | Vishay Sprag... | 29.64 $ | 1000 | CAP TANT 60UF 20% 50V AXI... |
| 0573800000 | Weidmuller | 331.3 $ | 1000 | BOX ALUM UNPTD 15.91"L X ... |
| 0573300000 | Weidmuller | 19.08 $ | 1000 | BOX ALUM UNPAINTED 2.95"L... |
| 0573400000 | Weidmuller | 29.91 $ | 1000 | BOX ALUM UNPAINTED 4.92"L... |
| 0573439001 | Molex, LLC | 2.08 $ | 1000 | 23 TON HYDRAULIC HEAD W/ ... |
| 0573487000 | Molex, LLC | 542.62 $ | 1000 | FLAT CABLE IDT JIG |
| 0573885202 | Molex, LLC | 0.69 $ | 1000 | LOCATOR |
| 0573476000 | Molex, LLC | 0.0 $ | 1000 | JAPANESE EXTRACTION TOOL |
| 0573886000 | Molex, LLC | 0.0 $ | 1000 | EXTRACTOR TOOL FOR 12 GA |
| 0573496000 | Molex, LLC | 0.0 $ | 1000 | EXTRACTOR 51240/51241 |
| 0573096000 | Molex, LLC | 0.0 $ | 1000 | EXTRACTOR 50351 |
| 05738N | 6.68 $ | 1000 | FILE,6",HAND BASTARD,152M... | |
| 0573166000 | Molex, LLC | 112.73 $ | 1000 | EXTRACTOR 51112 |
| 0573536000 | Molex, LLC | 297.51 $ | 1000 | EXTRACTOR TOOL 573536000 |
| 0573886100 | Molex, LLC | 347.1 $ | 1000 | EXTRACT TOOL FOR 14-26 GA... |
| 0573885200 | Molex, LLC | 0.69 $ | 1000 | HAND TOOL ASSY |
| 025-0573-000 | ITT Cannon, ... | 0.0 $ | 1000 | RP DPA 60 DUST CAP |
| 025-0573-001 | ITT Cannon, ... | 0.0 $ | 1000 | RP DPA 60 CONDUCTIVE DUST... |
| 0573535000 | Molex, LLC | 416.51 $ | 1000 | TOOL HAND CRIMPER FIREWIR... |
| 0573905000 | Molex, LLC | 476.01 $ | 1000 | TOOL HAND CRIMPER 50836 S... |
| 0573555000 | Molex, LLC | 542.62 $ | 1000 | TOOL HAND CRIMPER 22-28AW... |
| 0573555100 | Molex, LLC | 542.62 $ | 1000 | TOOL HAND CRIMPER 59319/5... |
| 0573865000 | Molex, LLC | 542.62 $ | 1000 | TOOL HAND CRIMPER 50749 S... |
| 0573315000 | Molex, LLC | 0.69 $ | 1000 | TOOL HAND CRIMPER SIDE EN... |
| 0573645000 | Molex, LLC | 0.69 $ | 1000 | TOOL HAND CRIMPER 50684 S... |
| 0573535200 | Molex, LLC | 0.69 $ | 1000 | TOOL HAND CRIMPER SIDE EN... |
| 0573925300 | Molex, LLC | 0.69 $ | 1000 | H-TOOL 56086Tool |
| 0573495300 | Molex, LLC | 0.69 $ | 1000 | TOOL HAND CRIMPER 14-18AW... |
| 0573255000 | Molex, LLC | 0.69 $ | 1000 | TOOL HAND CRIMPER 26-28AW... |
| 0573555330 | Molex, LLC | 0.0 $ | 1000 | TOOL HAND CRIMPER 56114/5... |
| 0573915000 | Molex, LLC | 0.0 $ | 1000 | TOOL HAND CRIMPER 22-28AW... |
| 0573475200 | Molex, LLC | 0.0 $ | 1000 | TOOL HAND CRIMPER 16-18AW... |
| 0573285000 | Molex, LLC | 0.0 $ | 1000 | TOOL HAND CRIMPER 18-24AW... |
| 0573475400 | Molex, LLC | 0.0 $ | 1000 | TOOL HAND CRIMPER 16-22AW... |
TOOL HAND CRIMPERHand Crimper Tool
TOOL HAND CRIMPER 10-12AWG SIDEHand Crim...
TOOL HAND CRIMPER TOP ENTRYHand Crimper ...
TOOL HAND CRIMPER PHOTOVOLTAICHand Crimp...
TOOL HAND CRIMPER 14-18AWG SIDEHand Crim...
TOOL HAND CRIMPER COAX SIDEHand Crimper ...