0622001200

Crimpers, Applicators and Presses are machines which are used for a wide variety of industrial applications. Their main purpose is to apply pressure to components such as wires, cables, metals and even plastics in order to join them together, by either crimping, applying an adhesive or pressing them into shape. In this article, we will discuss the various fields in which these machines are used, as well as the basic working principle of each type.

Crimpers

Crimpers are machines that are used to join two pieces of wire together by crimping the ends of each wire. The machine typically consists of a barrel, which is loaded with a metal die that is specially designed for the task at hand. The die is then locked into the machine, and pressure is applied to each of the wires by means of a lever or a motorised actuator. The pressure is transferred from the barrel to the wires, resulting in the crimping of the metal ends and the joining of the pieces together.

Applicators

An Applicator is used to apply a thin layer of adhesive onto a surface. This type of machine is typically used for tasks such as bonding materials together or forming seals. The machine consists of a nozzle through which the adhesive is extruded, as well as an air cylinder for controlling the flow and pressure of the adhesive. The machine can also be equipped with a vacuum device for holding the two pieces in place while the adhesive is applied.

Presses

A Press is a machine that is used to shape or form a piece of material into the desired shape by applying pressure. It is typically used for tasks such as bending, stamping and cold-forming metal parts. The machine consists of a hydraulic cylinder which is used to apply pressure to the material. The pressure is transferred from the cylinder to the material via a press plate which is attached to the end of the cylinder. This type of machine is used for many applications such as sheet metal fabrication, punching and forming of plastic products.

Working Principle of Crimpers, Applicators and Presses

The working principle of Crimpers, Applicators and Presses is based upon the application of force on two components or materials in order to join them together. The force is transferred from the machine to the components via either a lever or a motorised actuator. For the crimping process, the force is translated via a specially designed die that is fitted into the machine. The process for applying an adhesive is slightly different, as the adhesive is extruded through a nozzle and the air pressure is used to control the flow and pressure of the adhesive. In the case of a press, the force is transferred via a press plate which is attached to the end of a hydraulic cylinder.

In conclusion, these machines are essential in the industrial sector, as they are used for a wide variety of applications. From crimping wires together to applying adhesives and forming metal products, they provide an efficient and cost effective solution for tasks that would otherwise be impossible to complete. Now that we have discussed the various application fields and the basic working principle of these machines, you should have a better understanding of the uses of Crimpers, Applicators and Presses.