0622014700

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

0622014700 is a type of coaxial connector. Similar to a BNC connector, it is commonly used for high-frequency signal transmission. It is most widely used in the fields of communication networks, defense, test and measurement, medical, control automation, and security surveillance. The working principle of 0622014700 is based on two metal cylinders and an insulator, which makes it possible to link two ends. There are several pieces of metal in this connector to establish the electrical conduction and insulation between the internal and external circuits: the inner conductor is a metal tube, which is connected to the center pin of the female connector; the inner insulator, which is called the middle pin, is made of insulating material and supports and protects the inner conductor; the external conductor is metal braided shield or solid shield, which ensures that the length of the external conductor and the external conductor is nearly equal. Finally, the outer most jacket is made of softer plastic material to protect the internal conductors and further reduce signal attenuation.

In order to ensure the reliability of the 0622014700 connection, an additional locking clip is installed at the rear part of the connector. Therefore, it is suitable for use in outdoor and unstable conditions. When the 0622014700 connector is being assembled, the interference between the inner conductor and the outer conductor needs to be solved. There are two kinds of solutions: one is to use sealant to seal the ground shield with the external casing jacket, and the other is to connect the external conductor to ground with a ground wire in order to fully shield the internal conductor, forming a ground loop.

Besides, 0622014700 connectors are often used in conjunction with constant impedance cables, such as shielded cables, to minimize the amount of distortion caused by the transition of the signals. The impedance of the connectors is selected according to the impedance of the connected cables. Currently, 50 Ohm and 75 Ohm are the most commonly used impedances. In order to ensure the output accuracy of 50 Ohm connectors, the length of the metal tubes and the external conductors and their diameters must be carefully controlled. In applications where high accuracy and stability are required, such as broadcasting and recording studios, all cables and connectors must be carefully tested before installation and use.

In summary, 0622014700 is a type of coaxial connector which has a wide range of applications. Its working principle can be explained as two metal conductors and an insulator being used to establish connection between two ends. Additional locking clips are installed to ensure its reliability. This connector is used together with shielded cables to minimize signal distortion and the impedance of the connectors must correspond to the impedance of the connected cables.

The specific data is subject to PDF, and the above content is for reference