0638830670

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The 0638830670 is a device often used as an accessory for crimpers, applicators and presses. It goes by various names including bent-handle hexagon die wrench, calibrated hexagon die wrench, and hexagon die remover. This device is useful for installing dies of various sizes into crimping, transfilling and other types of applicators or presses.

The body generally has a flat handle with a bent tip. The tip holds the die, which then is put into the back of the crimping device. The handle is calibrated to fit a hexagon die. Special type hexagon dies can also be installed in the 0638830670, which often can come in a range of sizes from 1/4 inch to 1 ¼ inches.

The 0638830670 is designed for use with a chain hoist. The operator installs the die into one end of the device and places the other end of the handle into a chain hoist. The chain hoist is then used to apply the necessary pressure to hold the die in place for installation. A torque wrench, which is connected to the drive mechanism of the hoist, is used to ensure that the correct pressure is applied when installing the die into the applicator or press.

The die is secured to the device with a set screw. Once the die is securely installed on the device, the chain hoist applies the correct amount of pressure to hold the die in place. This will ensure a tight fit and prevent any damage to the die or the applicator.

The 0638830670 is also equipped with a safety lock. This feature prevents accidental damage to the material used by restricting unnecessary tension on the die, thus preventing it from sliding into the chains of the hoist. The automatic safety lock also prevents the operator from inadvertently releasing the die while working on pressing, crimping or transfilling process.

In conclusion, the 0638830670 is an accessory designed for use with various crimpers, applicators and presses. It uses a calibrated handle to hold the die in place and can be secured with a set screw. A chain hoist is used to apply the necessary pressure to ensure a tight and secure fit when installing the die into the applicator or press, and a safety lock prevents any damage to the die or the applicator. The 0638830670 is invaluable in performing precision work and making sure that the applicator or press operates properly.

The specific data is subject to PDF, and the above content is for reference