0663005.MALL

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The 0663005.MALL is an electrical safety device used to protect electrical circuits from damage caused by excessive current, overheating, or fire. It consists of a metal body filled with a conductive material such as copper wire, a fuse element, a fuse holder, and two terminal posts. When an electrical fault occurs, the fuse element heats up and melts, interrupting the current flow and protecting the circuit from damage. This type of fuse is used in many commercial and industrial applications, such as motors, lighting, and communications.

The 0663005.MALL is available in a wide range of sizes and ratings, primarily determined by the maximum amount of current they can safely handle. Typical sizes range from 1 amp to 20 amps, and the most common ratings are 3A, 5A, 10A, 15A, 20A, 30A, and 40A. The most common materials used for the fuse element are tin, copper, silver, and zinc. The fuse holder may be made of plastic, metal, or glass. The terminals are typically copper or brass.

In order to ensure the safety of a circuit, the 0663005.MALL must be correctly sized and correctly rated. The rated current should be matched to the circuit requirements, and it should be chosen based on the maximum current expected on the circuit. The fuse holder must be securely mounted in the correct orientation and should be placed close to the point of the current flow in the circuit. When installing a new fuse, it is also important to check the fuse for signs of burn or damage as a safety precaution.

The 0663005.MALL is designed to interrupt the flow of current when it detects an excessive current condition. The fuse element is made of a metal, which has a higher resistance than the current-carrying conductor. When the increased current passes through the fuse, the metal heats up and melts. This action interrupts the circuit and stops the current flow, protecting the circuit from damage. The fuse is designed to open and close quickly to protect the circuit, and it will usually need to be replaced after opening.

The 0663005.MALL is an important device for protecting electrical circuits from overcurrent and overvoltage conditions. It is designed to open quickly when an excessive amount of current is detected, protecting the circuit and preventing it from damage. It is available in a variety of sizes and ratings, so it is important to choose the right one for the application. As with any electrical safety device, it is important to properly install and inspect the fuse to ensure safe operation.

The specific data is subject to PDF, and the above content is for reference