0673002.DRT4P

The 0673002.DRT4P is a fuse that functions within specific predetermined parameters to protect a larger circuit from over current, short circuit, or overloaded conditions. This makes it an important piece of circuit protection for many electronic and electrical systems.

The 0673002.DRT4P is a fast acting fuse designed to protect a wide range of electronic and electrical circuits by providing a fast-acting protection against over-current, short-circuit, and overload conditions. This type of fuse is typically used for motor and compressor control functions on industrial machinery, as well as for other high power applications. Additionally, this type of fuse is used as surge protection in industrial environments, automotive applications, and consumer electronics.

The 0673002.DRT4P is constructed with a two-piece molded plastic case that contains the current sensing elements, which are typically made from an alloy of zinc and copper. The current sensing element is biased so that it will conduct current only when the current is higher than the rated fuse value. When the current through the element exceeds the fuse rating, the element will heat up and the plastic case will melt, which triggers an open circuit that effectively disconnects the circuit.

The 0673002.DRT4P is rated to handle currents up to 1000 amps, and can withstand surge currents up to 1.25 times its rating. It has an interrupt rating of 500 volts, which indicates the maximum voltage that can be interrupted by the fuse without damage. This fuse is UL listed for use with AC and DC circuits.

The 0673002.DRT4P has a very fast-acting response time, which is ideal for situations when overcurrent protection is needed quickly. This type of fuse is relatively low-cost and does not require any additional external components, making it easy to install and replace.

The 0673002.DRT4P is an indispensable tool for protecting high-powered systems and applications. Its fast-acting design allows it to quickly protect against overcurrent, short circuit, and overloaded conditions, while its two-piece plastic case and interrupt rating of 500 volts makes it suitable for a wide range of applications. This makes the 0673002.DRT4P an ideal choice for circuit protection in many electronic and electrical systems.