0675.200DRT4P

Package / Case:	Cartridge, Non-Standard (Axial)
DC Cold Resistance:	2.485 Ohms
Size / Dimension:	0.154" Dia x 0.433" L (3.90mm x 11.00mm)
Color:	--
Operating Temperature:	--
Approvals:	CSA, UL
Melting I²t:	0.0158
Breaking Capacity @ Rated Voltage:	50A
Mounting Type:	Through Hole
Series:	675
Response Time:	Slow
Voltage Rating - AC:	250V
Current Rating:	200mA
Fuse Type:	Cartridge, Ceramic
Moisture Sensitivity Level (MSL):	--
Part Status:	Active
Lead Free Status / RoHS Status:	--
Packaging:	Tape & Reel (TR)

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

<!-- START: 0675.200DRT4P application field and working principle --><h2>Fuses</h2><p>A fuse is an electrical or electronic device that is designed to operate to interrupt an electric circuit when overloaded. It is inductively or capacitor-sensed and the current flows through a conducting element that melts and releases the fuse contacts when the current exceeds the rated limit. Fuses are designed to protect electrical circuits, appliances and inductive loads, such as motors or transformers, from overcurrent. In other words, they are designed to fail in the event of an overcurrent and disconnect the power to the endangered circuit or component.</p><h3>0675.200DRT4P Application Field and Working Principle</h3><p>The 0675.200DRT4P fuse is a high-end fuse assembly designed and manufactured by Schneider Electric specifically for the protection of low voltage equipment and components with a rated current up to 200A. It is a single-pole, time-delay, low-fault current, fusible safety switch and utilises a cartridge type fuse technology for enhanced reliability.</p><p>The working principle of the 0675.200DRT4P fuse is very simple. It is designed to operate in the event of an overload or short circuit condition on an electrical circuit. It works by sensing a current in the circuit, and if that current is greater than the rated limit (in this instance, 200A) then the fuse element melts, releasing the contacts thus interrupting the circuit and protecting the components downstream from the overload.</p><p>The 0675.200DRT4P fuse is suitable for protecting motor circuits and other low voltage equipment and components. It is typically used in refrigeration, air conditioning, lighting, heating and pump systems. It is also well suited for protection from disconnection of supply because of mechanical failure such as the failure of motor bearings or overheating.</p><p>The 0675.200DRT4P fuse has a single pole, time-delay, low-fault current design, which makes it a suitable choice for applications where there is an increased risk of high-current faults such as motors or transformers. The fuse also offers protection against overheating, voltage spikes and sustained overloads.</p><h3>Conclusion</h3><p>The 0675.200DRT4P fuse is a highly reliable, single-pole, time-delay, low-fault current, fusible safety switch designed and manufactured by Schneider Electric. It is suitable for protecting motor circuits and other low voltage equipment and components. It is designed to operate in the event of an overload or short circuit condition on an electrical circuit, and it works by sensing a current in the circuit and if that current is greater than the rated limit then the fuse element melts, releasing the contacts and protecting the components downstream from the overload.</p><!-- END: 0675.200DRT4P application field and working principle -->

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description