Allicdata Part #: | 1144-1066-ND |
Manufacturer Part#: |
06DPCW5 |
Price: | $ 22.54 |
Product Category: | Filters |
Manufacturer: | Delta Electronics |
Short Description: | LINE FILTER 115/250VAC 6A CHAS |
More Detail: | N/A |
DataSheet: | 06DPCW5 Datasheet/PDF |
Quantity: | 1000 |
18 +: | $ 20.49460 |
Series: | DP |
Part Status: | Active |
Filter Type: | Single Phase |
Configuration: | Two Stage |
Voltage - Rated DC: | -- |
Voltage - Rated AC: | 115V, 250V |
Current: | 6A |
Frequency - Operating: | 50/60Hz |
Applications: | General Purpose |
Approvals: | CSA, UR, VDE |
Operating Temperature: | -- |
Mounting Type: | Chassis Mount |
Termination Style: | Wire Leads |
Inductance: | -- |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
Power Line Filter Modules are designed to filter out any unwanted electrical noise that might have been generated by other components in the application. 06DPCW5 is a popular type of filter module which is often used in applications that need a clean and reliable power source.
The 06DPCW5 is essentially a low-pass analog filter with a six-pin configuration. It is designed to filter out frequencies below 50kHz and provide a stable power source to the connected circuit. It is also designed to help reduce any interference signals that may be created by nearby components within the larger system. It does this by blocking any high-frequency signals which could create noise or cause signal corruption.
The 06DPCW5 is typically composed of four capacitors, one inductor, and two resistors, in its basic configuration. The inductor is used to create a low-impedance path for the current to flow while the capacitors, resistors, and power connections filter out any unwanted electrical noise. This ensures that the circuit is not adversely affected by any external electrical interference.
In order to work effectively, each component of the filter module must be connected correctly. This is achieved by connecting the positive power connections to the inductive components and the negative power connections to the capacitive components. The components must also be connected in a specific order, with the first component being the inductor, followed by the resistor, then the capacitors, and last the second resistor.
The 06DPCW5 is designed to operate in wide range of applications. It is typically used in communications systems, automotive, audio, and video applications, as well as in energy conversion, consumer electronics, and industrial control systems. It is a reliable and cost efficient way to ensure that the circuit is properly protected from any external electrical interference.
In summary, the 06DPCW5 is a reliable and cost efficient filter module and can provide a clean and stable power source to the connected circuit. It is composed of four capacitors, one inductor, and two resistors in its basic configuration and is easy to set up and operate. It is often used in communications, automotive, audio, video, energy conversion, consumer electronics, and industrial control systems.
The specific data is subject to PDF, and the above content is for reference
Part Number | Manufacturer | Price | Quantity | Description |
---|
06DPCG5 | Delta Electr... | 22.53 $ | 1000 | LINE FILTER 115/250VAC 6A... |
06DPCW5 | Delta Electr... | 22.54 $ | 1000 | LINE FILTER 115/250VAC 6A... |
06DPCG5C | Delta Electr... | 7.85 $ | 1000 | LINE FILTER 115/250VAC 6A... |
06DPCG5CM | Delta Electr... | 11.0 $ | 51 | LINE FILTER 115/250VAC 6A... |
06DPCG5B | Delta Electr... | 16.69 $ | 70 | LINE FILTER 115/250VAC 6A... |
LINE FILTER 250VAC 20A CHASS MNT
LINE FILTER 125/250VAC 4A TH
LINE FILTER 500VAC 100A CHASSIS
LINE FILTER 480VAC 50A CHASS MNT
LINE FILTER 480/520VAC 36A CHASS
LINE FILTER 480VAC 65A CHASS MNT