Allicdata Part #: | 364-1023-ND |
Manufacturer Part#: |
06EK33 |
Price: | $ 0.00 |
Product Category: | Filters |
Manufacturer: | Curtis Industries |
Short Description: | LINE FILTER 250VAC 6A CHASS MNT |
More Detail: | N/A |
DataSheet: | 06EK33 Datasheet/PDF |
Quantity: | 1000 |
1 +: | 0.00000 |
Series: | EK, Curtis Industries/PREO |
Part Status: | Obsolete |
Filter Type: | Single Phase |
Configuration: | Single Stage |
Voltage - Rated DC: | -- |
Voltage - Rated AC: | 250V |
Current: | 6A |
Frequency - Operating: | 50/60Hz |
Applications: | General Purpose |
Approvals: | CSA, UR, VDE |
Operating Temperature: | -- |
Mounting Type: | Chassis Mount |
Termination Style: | Wire Leads |
Inductance: | -- |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
Power line filter modules are used to reduce interference from electromagnetic and radio wave sources generated by electrical and electronic equipment. The 06EK33 module is designed to provide high performance attenuation of conducted and radiated line noise on power and data lines from DC up to 33 MHz.
The 06EK33 is available in three sizes: the single-stage, two-stage, and three-stage modules. It is made up of flexible capacitors, providing high attenuation of switching transients and protective contact interference. Due to its small size, the 06EK33 can be easily integrated into complex electromagnetic and radio waves, providing cost-effective and reliable filtering.
The working principles of the 06EK33 module vary depending on the application. In power line applications, the module uses common-mode and differential-mode chokes to block conducted interference from nearby electrical and electronic devices. The filtered signals are then passed to the input and output terminals.
In data line applications, the module uses a combination of balanced and screened filtering. Common-mode chokes inhibit conducted interference from nearby power or data lines, while the balanced line signal passing through the filter is screened for protection from radiation and electromagnetic fields generated by the equipment.
For more sensitive applications, the module is also designed with an additional layer of shielding to reduce radiated emissions. This layer of shielding is designed to block any unwanted electromagnetic energy, caused by nearby devices operating from higher frequencies than the filter can handle.
In addition to its noise-reduction capabilities, the 06EK33 module also has a wide temperature range from -40°C to +85°C, making it suitable for most applications. The module also meets international safety regulations and includes integrated thermal protection. It is easy to install and can be used in a variety of operating environments.
Overall, the 06EK33 module is an efficient and cost-effective solution for reducing the interference generated by electrical and electronic equipment with both power and data lines. Its advanced filtering capabilities and wide temperature range make it suitable for most applications.
The specific data is subject to PDF, and the above content is for reference
Part Number | Manufacturer | Price | Quantity | Description |
---|
06EK11 | Curtis Indus... | 0.0 $ | 1000 | LINE FILTER 250VAC 6A CHA... |
06EK33 | Curtis Indus... | 0.0 $ | 1000 | LINE FILTER 250VAC 6A CHA... |
06EK3M | Delta Electr... | 16.02 $ | 159 | PWR ENT MOD RCPT IEC320-C... |
06EK3 | Delta Electr... | 16.15 $ | 107 | PWR ENT MOD RCPT IEC320-C... |
06EKM1 | Curtis Indus... | 0.0 $ | 1000 | PWR ENT RCPT IEC320-C14 P... |
LINE FILTER 250VAC 20A CHASS MNT
LINE FILTER 125/250VAC 4A TH
LINE FILTER 500VAC 100A CHASSIS
LINE FILTER 480VAC 50A CHASS MNT
LINE FILTER 480/520VAC 36A CHASS
LINE FILTER 480VAC 65A CHASS MNT