0819R-86G

DC Resistance (DCR):	43 Ohm Max
Height - Seated (Max):	--
Size / Dimension:	0.078" Dia x 0.200" L (1.98mm x 5.08mm)
Supplier Device Package:	Axial
Package / Case:	Axial
Mounting Type:	Through Hole
Inductance Frequency - Test:	790kHz
Operating Temperature:	-55°C ~ 105°C
Ratings:	--
Frequency - Self Resonant:	5.9MHz
Q @ Freq:	35 @ 790kHz
Series:	0819R
Shielding:	Unshielded
Current - Saturation:	--
Current Rating:	33mA
Tolerance:	±2%
Inductance:	390µH
Material - Core:	Ferrite
Type:	Molded
Part Status:	Active
Packaging:	Tape & Reel (TR)

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Fixed inductors have been around for many decades and are widely used in various electronic applications and circuits. The 0819R-86G is a new inductor in this category. It is made up of fine grain, low resistance, high permeability magnetic material. It is used for signal frequency range applications and typically operates in the 10kHz to 70MHz range.

The 0819R-86G is a compact and powerful inductor that is used in a variety of applications. The most common applications of the 0819R-86G are as an impedance matching network, inductive pulse transformer, and as an output filter. In each of these applications, the 0819R-86G performs the job of providing the necessary inductance values in order to effectively carry out the related electronic tasks.

In an impedance matching network, its job is to achieve a good frequency response by providing the necessary amount of inductance. This is achieved by allowing high-frequency signals to pass through the inductor without any significant loss of power. The signal then passes through the matching network and continues on its way without any additional losses.

The 0819R-86G is also used as an inductive pulse transformer. This is used to convert low voltage signals into high voltage signals. The inductor provides the necessary inductance values which are necessary to transform an alternating current signal into a steady-state pulse. This is a common technique used in a variety of digital applications.

The 0819R-86G is also used as an output filter. An output filter is usually used to reduce the amount of unwanted noise generated by the electronic circuit. The inductor acts as a filter by providing the circuit with a low-impedance path to ground. This reduces the amount of noise generated by the circuit and allows the desired signal to pass through with minimal distortion.

The 0819R-86G is a high-quality inductor that is suitable for a wide range of applications. It is typically available in a range of inductance values which are suitable for most applications. The inductor is reasonably priced and can be found at a wide range of online stores.

The working principle of the 0819R-86G is based on magnetic induction. When the current moves through the inductor, a magnetic field is created and the magnetic field produces an opposing current. This induces an opposing magnetic field which creates an inductance in the circuit. The inductance of the inductor is affected by the surrounding magnetic fields, and this is why it is an important component in many electronic circuits.

The 0819R-86G is particularly suitable for use in frequency range applications due to its low resistance. The inductor is also versatile and can be used in a variety of electronic circuits. Its unique compact size makes it an attractive option for many designers.

In conclusion, the 0819R-86G is an ideal inductor for a variety of applications. It is a versatile and compact component that is suitable for a wide range of applications in the signal frequency range. It is reasonably priced and can be found at a wide range of online stores. Due to its high permeability material and low resistance, the 0819R-86G is a suitable inductor for many frequency range applications.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description