087501.6MXEP

Package / Case:	Cartridge, Non-Standard (Axial)
DC Cold Resistance:	0.0476 Ohms
Size / Dimension:	0.142" Dia x 0.394" L (3.60mm x 10.00mm)
Color:	--
Operating Temperature:	-55°C ~ 125°C
Approvals:	cULus
Melting I²t:	5.08
Breaking Capacity @ Rated Voltage:	50A
Mounting Type:	Through Hole
Series:	875
Response Time:	Slow
Voltage Rating - AC:	250V
Current Rating:	1.6A
Fuse Type:	Cartridge, Ceramic
Moisture Sensitivity Level (MSL):	--
Part Status:	Active
Lead Free Status / RoHS Status:	--
Packaging:	Bulk

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Fuses--087501.6MXEP Application Field and Working Principle

Fuses are safety devices in electrical circuits that carry electric current to protect both people and property. Therefore, they must be chosen carefully and correctly. 087501.6MXEP fuses are one of the fuses commonly used in electrical circuits. This article will discuss the application field and working principle of 087501.6MXEP fuses.087501.6MXEP fuses are suitable for AC 50/60Hz (300V) system or DC (250V) system. The rated current of the fuse is 1A, and the rated voltage is 300VAC/250VDC. The 087501.6MXEP fuse is mainly used in power transmission, power distribution, and signal distribution. Its key function is to protect the power system and prevent damage to the power system caused by overload or short circuit.The working principle of the 087501.6MXEP fuse is as follows: when the overcurrent or short circuit is on the line, the fuse will lower its resistance, so as to allow a large amount of current to flow through it. Meanwhile, the fuse will heat up due to the large amount of current, and its surface temperature will quickly reach the melting point. The fuse wire within the fuse will be melted by heat, thus disconnecting the circuit so as to eliminate the danger of the line. When the current is lower than the rated current or the overcurrent and short circuits are eliminated, the fuse\'s working state will return to normal.When selecting a fuse, it is important to note that the rated current of the fuse should not be lower than the rated current of the equipment used. In addition, it should be noted that the voltage should not be higher than the rated voltage of the fuse. Improper fuse selection may result in the fuse being unable to operate properly, or even cause danger such as an explosion or fire.In conclusion, the 087501.6MXEP fuse has a wide application field and is suitable for AC 50/60Hz (300V) system or DC (250V) system. Its function is to protect the power system by disconnecting the circuit in response to overcurrent or short circuit. When selecting a fuse, it is important to select the appropriate fuse based on the equipment\'s rated voltage and current.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description