09041326952

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Introduction

DIN 41612 is a specification from the German Institute for Connectors (DIN), designed for backplane connectors. This specification provides the physical and general design requirements for a wide variety of connectors, including the 09041326952 type, which is widely used in industrial applications. These connectors can be used to connect logic boards, printed circuit boards, and other electronic devices.

Application Field and Working Principle

The 09041326952 type of DIN 41612 connectors can be used in a variety of applications, including switchgear, UPS systems, programmable logic controllers, and automation systems. These connectors are well-suited for the interconnection of printed circuit boards, logic boards, and other electronic devices. The connectors are made from a variety of materials, including brass, silver, and zinc. The contact surface of the connectors is typically plated with tin and gold.

The purpose of these connectors is to create an electrical connection between two or more circuit elements. They consist of two parts, the male and the female connectors. The female side is typically a receptacle, while the male side is typically a plug. Each connector is equipped with a number of pins or sockets, depending on the application. The pins or sockets are then connected to each other using a soldering process. Depending on the application, the pins may be connected to either one or two layers of PCBs, usually with a maximum of four pins in each layer.

The effectiveness of a given 09041326952 type of connector depends largely on the materials used to construct it. It is essential that the contact surfaces of the connectors are smooth and free from defects in order to ensure proper connection. In addition, the materials used should be of a high corrosion-resistant grade. All the pins and sockets should be firmly attached to the connectors, ensuring an optimal connection with the circuit elements.

Conclusion

The 09041326952 type of DIN 41612 backplane connectors is widely used in industrial applications. These connectors are made from a variety of materials, including brass, silver, and zinc, and the contact surface is typically plated with tin and gold. The purpose of these connectors is to create an electrical connection between two or more circuit elements. For optimal connection, it is essential that the contact surfaces of the connectors are smooth and free from defects, and that the materials used are corrosion-resistant. With the proper care, these connectors can be used for a variety of applications, providing a reliable electrical connection.

The specific data is subject to PDF, and the above content is for reference