DC Resistance (DCR):	21 Ohm Max
Height - Seated (Max):	--
Size / Dimension:	0.095" Dia x 0.250" L (2.41mm x 6.35mm)
Supplier Device Package:	Axial
Package / Case:	Axial
Mounting Type:	Through Hole
Inductance Frequency - Test:	790kHz
Operating Temperature:	-55°C ~ 105°C
Ratings:	--
Frequency - Self Resonant:	7.8MHz
Q @ Freq:	38 @ 790kHz
Series:	0925
Shielding:	Shielded
Current - Saturation:	14mA
Current Rating:	46mA
Tolerance:	±3%
Inductance:	390µH
Material - Core:	Ferrite
Type:	Molded
Part Status:	Active
Packaging:	Tape & Reel (TR)

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Fixed Inductors

The 0925-394H requires a precise application in relation to inductors in electronics. This inductor is a member of the family of fixed inductors that are all designed to maintain a steady state when a current or voltage is passed through them. A brief explanation of the operations and applications of the 0925-394H is presented below.

Introduction to Fixed Inductors

Fixed inductors are a type of part used in electronics to generate a precise level of inductance to a load. These parts are made from a coil of wire which is wound around a core; this core can be made of many different materials, such as metal alloys, ferrite, powdered iron or plastic polymer. The inductance of the part is directly proportional to the number of turns on the coil and the core material.Inductors are made up of alternating current components which are dramatically affected by changes in the frequency of the current. This alternating current causes a force which is called inductance; this force is necessary to create a voltage drop across the component. A higher frequency current will cause a higher inductance to be created.

The 0925-394H Inductor

The 0925-394H is a type of fixed inductor designed to maintain a steady state when a current or voltage is passed through the component. The 0925-394H is a medium sized inductor measuring 28mm x 28mm x 15.5mm, making it suitable for use in a range of applications. This part has a voltage rating of up to 25 volts and is rated for a temperature range of up to 85°C.The inductance of the 0925-394H is dependent upon the number of turns on the coil and the core material. The component uses a ceramic core for increased inductance ratings, and can produce between 5.45mH and 5.99mH depending on the number of turns. The 0925-394H can be used in a range of applications from audio filters to signal conditioning circuits.

Applications of the 0925-394H

The 0925-394H can be used in a variety of applications where a steady state of voltage or current is desired. One such application is signal conditioning circuits, as the stable inductance of the component allows for reliable performance in these circuits. The 0925-394H can also be used in audio filters, where the component can be used to remove noise from audio signals. The component can be used in switching and power supply circuits, as well as in matching transformers.The 0925-394H is also suitable for use in RF circuits, as it can be used to filter out unwanted frequencies from a signal. The component can be used in conjunction with an op-amp or amplifier to increase the gain of a signal.

Working Principle of the 0925-394H

The working principle of the 0925-394H is based on the basic rules of electromagnetism. As a current is passed through the component, a force is generated – this force is known as inductance.The inductance of the 0925-394H is determined by the number of turns on the coil and the core material. The component uses a ceramic core, which allows for a higher level of inductance than other materials. This higher level of inductance allows the component to produce a steady state when a voltage or current is passed through.The 0925-394H can generate a range of inductance levels, depending on the number of turns on the coil. This range can be between 5.45mH and 5.99mH. The component also has a voltage rating of up to 25 volts, allowing it to function in a variety of applications.

Conclusion

The 0925-394H is a type of fixed inductor designed to maintain a steady state when a current or voltage is passed through the component. The component is made from a coil of wire wound around a ceramic core, and has an inductance range of 5.45mH to 5.99mH. The 0925-394H can be used in a variety of applications, from audio filters to signal conditioning circuits, and is suitable for use in RF circuits. By understanding the basics of its working principle, engineers and technicians can make use of the 0925-394H to improve the performance of their systems.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description