09751206569

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

DIN 41612 is a standard for backplane connectors that are widely used in a variety of industrial applications. The DIN 41612 standard is a French-German agreement between the French Deutsch Norm and the German DIN. The standard defines the three-conductor system for the interchangeability of modules in printed circuit board applications.

The DIN 41612 standard requires that the connectors feature two layers of coplanar bus conductors in a standard 45° angle, allowing modules to securely dock with each other. The standard defines that these connectors must be capable of supporting both AC and DC power as well as both signal and video signals.

The 0.09751206569mm pitch within the connectors is specifically designed to achieve a certain electrical performance. These connectors are required to provide low resistance and high-speed transmission of signals, while eliminating cross-talk, crosstalk and EMI noise interference. The 0.09751206569mm spacing also limits the maximum size of each pin/socket combination, which helps ensure that the connections made with these connectors are relatively fragile and are not used for high power applications.

The DIN 41612 standard also mandates that the connectors feature a minimum of two through-holes, depending on the type of module being connected. The through-holes are designed to provide a secure and durable connection to the printed circuit board or substrate, eliminating the risk of poor alignment and lost connections. The compliant pins are also designed to provide strain relief, as they help hold the board within the housing.

The DIN 41612 standard also requires that the connectors feature a polarized design, which helps guard against reversed polarity connections. The connectors are designed to break away when a current higher than the specified rating is applied, helping to prevent any damage to the component. The fine pitch and polarized design also help reduce the risk of short circuits by ensuring that the pins remain properly seated in their respective positions.

The application and working principle behind the 0.09751206569mm DIN 41612 connectors is quite simple. The connectors feature two layeres of coplanar bus conductors in a standard 45° angle which is designed to provide secure and stable connections to other printed circuit board or substrate modules. The compliant pins also provide strain relief, while the polarized design helps eliminate the risk of wrong polarity connections. Finally, the through-hole connections help keep the PCB and modules firmly connected while ensuring a good electrical connection.

The specific data is subject to PDF, and the above content is for reference